Bailey dump valve and MY99
Went to Powerstation this morning to have a Bailey valve fitted to my UK MY99 (June 99). However, was told by Rich that he couldn't fit to the car due to the positon of the existing valve.
I was of course mortified, I had been looking forward to scaring the old and informed for a couple of weeks
.
Has anyone tried to fit to a 99, or any ideas on which one can be used?
As an aside, power run was successfull with the car putting out 229bhp, only mode being scoobysport rear box and ITG filter. Any thought on cheap ways (don't realy want to play around with ECU) to up power/torque.
Cheers
Matt
I was of course mortified, I had been looking forward to scaring the old and informed for a couple of weeks
.Has anyone tried to fit to a 99, or any ideas on which one can be used?
As an aside, power run was successfull with the car putting out 229bhp, only mode being scoobysport rear box and ITG filter. Any thought on cheap ways (don't realy want to play around with ECU) to up power/torque.
Cheers
Matt
as iv'e changed my car for an evo 6 i have in my garage a fitting kit for a bailey bov,it replaces standard bov(on intercooler)takes about 5 mins to fit ,£5 and it's yours e mail me on marc.tuohey@talk21.com
S600BYY
S600BYY
I have a my99 and have just fitted a bailey evo dump valve to it.
The fitting kit for it which bolts the dump valve to the intercooler is available from graham goode racing in leicester ( they have just finished making them ). They are available in red, blue and alloy and cost £55 which aint cheap but they work and fit well.
Hope this helps and good whooshing!
ady
their tel no: 0116 2440080
[This message has been edited by adyhicut (edited 24-07-2000).]
The fitting kit for it which bolts the dump valve to the intercooler is available from graham goode racing in leicester ( they have just finished making them ). They are available in red, blue and alloy and cost £55 which aint cheap but they work and fit well.
Hope this helps and good whooshing!
ady
their tel no: 0116 2440080

[This message has been edited by adyhicut (edited 24-07-2000).]
Thanx Matt ....... *smile*
Off to Halford for Blow Off Valve!!!!!!!!!!!
Arrggghhhhhhhhhh .... they dont have it there!!!!!!!!!!!! .......Halford sux.
Guess I have to settled for THRUST Blow Off valve from Japan..... comes complete fitting for WRX & STi ......*smile*
[This message has been edited by DYNT (edited 24-07-2000).]
Off to Halford for Blow Off Valve!!!!!!!!!!!
Arrggghhhhhhhhhh .... they dont have it there!!!!!!!!!!!! .......Halford sux.
Guess I have to settled for THRUST Blow Off valve from Japan..... comes complete fitting for WRX & STi ......*smile*
[This message has been edited by DYNT (edited 24-07-2000).]
Trending Topics
What were your reasons for fitting a different dump valve to a MY99 ?
Was it
a) That the original is well sized and needs no replacement.
b) That a vent to atmosphere valve can make driving the car tricky ?
Just wondering.....
wish I had £50 I could spend for no gains LOL
Was it
a) That the original is well sized and needs no replacement.
b) That a vent to atmosphere valve can make driving the car tricky ?
Just wondering.....
wish I had £50 I could spend for no gains LOL
remove the resonator box and get the soundtrack for FREE .
Do a search on "Resonator Box" - there's been a lot a talk about it recently.
I removed mine a few weeks ago, sounds good (intake sucking and blow off) ; not so loud that you (or passengers) would get sick of it.
Steve
Do a search on "Resonator Box" - there's been a lot a talk about it recently.
I removed mine a few weeks ago, sounds good (intake sucking and blow off) ; not so loud that you (or passengers) would get sick of it.
Steve
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Wheels And Tyres For Sale
0
Sep 29, 2015 02:18 PM





