help!!!!!!!!!!!!!!!!!!!!!!
29 November 2003, 05:23 PM
#1
Scooby Regular
Thread Starter
Join Date: Aug 2003
Posts: 1,768
Likes: 0
Received 0 Likes
on
0 Posts
My01 wrx with mods is pulling out 30 degress timing.
I have been to garage and have changed the knock senor, maf senor, checked the cam belt and put another ECU in with my map on it and still no good!!!!!
can anyone help please
Paul
I have been to garage and have changed the knock senor, maf senor, checked the cam belt and put another ECU in with my map on it and still no good!!!!!
can anyone help please
Paul
04 December 2003, 09:08 PM
#3
Scooby Regular
Join Date: Mar 2002
Posts: 683
Likes: 0
Received 0 Likes
on
0 Posts
Hi Paul,
Sorry to hear about the car,have you spoke to Knowlesy for any advice?
I met you at the Xtreme rolling road day,and enjoyed a spirited drive to Xtreme from the rolling road.
Apologies for being thick,but what are the signs of the timing being out? Have you had more mod's done since that rolling road day?
Regards
Dean
Sorry to hear about the car,have you spoke to Knowlesy for any advice?
I met you at the Xtreme rolling road day,and enjoyed a spirited drive to Xtreme from the rolling road.
Apologies for being thick,but what are the signs of the timing being out? Have you had more mod's done since that rolling road day?
Regards
Dean
04 December 2003, 09:17 PM
#4
Scooby Regular
Thread Starter
Join Date: Aug 2003
Posts: 1,768
Likes: 0
Received 0 Likes
on
0 Posts
hi mate,
have had 550 cc injectors, uprated fse and md304 turbo plus a new clutch.
pat re mapped and was great, went P.E for r.r and got 323 bhp and 281 lbs ft.
then after a few days it started to judder and lose all power under 3.5revs, extreme have checked most patrs in engine, (been great)pat has put standard map back on and still pulling out a lot of timing. why we all would like to know!!!
Any ideas welcome and will be checked
cheers mate
Paul
have had 550 cc injectors, uprated fse and md304 turbo plus a new clutch.
pat re mapped and was great, went P.E for r.r and got 323 bhp and 281 lbs ft.
then after a few days it started to judder and lose all power under 3.5revs, extreme have checked most patrs in engine, (been great)pat has put standard map back on and still pulling out a lot of timing. why we all would like to know!!!
Any ideas welcome and will be checked
cheers mate
Paul
05 December 2003, 06:42 PM
#5
Scooby Regular
Join Date: Mar 2002
Posts: 683
Likes: 0
Received 0 Likes
on
0 Posts
Hi Paul,
That's quite a few mods then
,What were the main differences in performance after these? apart from blistering "off the mark" speed.
Presumably,the problem you have is not good(probably an understatement!) short term or long term?
I hope you are successful in finding a solution.
Cheers
Dean
That's quite a few mods then
,What were the main differences in performance after these? apart from blistering "off the mark" speed.Presumably,the problem you have is not good(probably an understatement!) short term or long term?
I hope you are successful in finding a solution.
Cheers
Dean