cleaing the wastegate solonoid
#1
Scooby Regular
Thread Starter
Join Date: Mar 1999
Location: Near Bath
Posts: 1,256
Likes: 0
Received 0 Likes
on
0 Posts
I`ve heard that the booste solonoid needs cleaning from time to time , How do you do that ? Is it acase of removeing all 3 pipes and squirting a load of carb cleaner down the ports or is there something else to do after ?
Cheers Dave
Cheers Dave
#2
IIRC the FAQ gives the procedure for cleaning these pipes... As I recall, it is, as you suggest, basically a case of cleaning the hoses (and valve?) out with carb cleaner, resecuring them properly (v.important) and taking the car for a spin before the carb cleaner all evaporates! Quite a tricky job, getting it done safely and quickly enough to beat the carb cleaner!
I suspect the carb cleaner will do a fairly good job even if you don't manage to blow it right through the entire system...
I suspect the carb cleaner will do a fairly good job even if you don't manage to blow it right through the entire system...
Thread
Thread Starter
Forum
Replies
Last Post
aaron_ions
General Technical
14
25 September 2015 02:33 PM