STI 2 boost pressures
28 February 2000, 04:05 PM
#1
Scooby Regular
Thread Starter
Join Date: Mar 1999
Location: Near Bath
Posts: 1,256
Likes: 0
Received 0 Likes
on
0 Posts
Dear All ,
Could anyone out there with a standard STI2 please tell me what the correct boost pressure should be ? when I connected my boost guage the maximum it showed was around 11-11.5 psi. Having done the so called ECU reset it still made no difference. Any advice or comments are greatfully appreciated.
Cheers Dave
Could anyone out there with a standard STI2 please tell me what the correct boost pressure should be ? when I connected my boost guage the maximum it showed was around 11-11.5 psi. Having done the so called ECU reset it still made no difference. Any advice or comments are greatfully appreciated.
Cheers Dave
28 February 2000, 04:09 PM
#2
Scooby Regular
Join Date: Dec 1999
Location: Aberdeen
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:<HR>Originally posted by Big Bear:
<B>Dear All ,
Could anyone out there with a standard STI2 please tell me what the correct boost pressure should be ? when I connected my boost guage the maximum it showed was around 11-11.5 psi. Having done the so called ECU reset it still made no difference. Any advice or comments are greatfully appreciated.
Cheers Dave[/quote]
Mine registers 1 Bar (16 psi ?) on full boost. Then drops a little to about 15 psi
<B>Dear All ,
Could anyone out there with a standard STI2 please tell me what the correct boost pressure should be ? when I connected my boost guage the maximum it showed was around 11-11.5 psi. Having done the so called ECU reset it still made no difference. Any advice or comments are greatfully appreciated.
Cheers Dave[/quote]
Mine registers 1 Bar (16 psi ?) on full boost. Then drops a little to about 15 psi
28 February 2000, 08:27 PM
#4
Scooby Regular
Join Date: Jul 1999
Posts: 906
Likes: 0
Received 0 Likes
on
0 Posts
Yep I got 1 bar overboost and then 0.9 bar steady state.
Have you had any exaust mods done? Now I have a PE phase 1 on the car and the boost pressure was 1.15 bar ish, but I then had a downpipe and remap carried out and max boost is now 1.0 bar(but much quicker)
Have you had any exaust mods done? Now I have a PE phase 1 on the car and the boost pressure was 1.15 bar ish, but I then had a downpipe and remap carried out and max boost is now 1.0 bar(but much quicker)
29 February 2000, 06:34 PM
#6
Scooby Regular
Join Date: Jul 1999
Posts: 906
Likes: 0
Received 0 Likes
on
0 Posts
Big Bear,
Things to try include
Trying somebody elses boost guage (yours may be faulty)
(wild guess work here) but are you loosing boost pressure from anywhere? Do you have any whistling/whooshing sounds from under the bonnet?
You could also try plugging in another ECU from an STi2 to see if that helped.
I'm not saying that these are the most likely causes, but they are easy to check and cost no money
I'd offer you my ECU to try but as it's got a PE Phase 1 it would be a no go(map would be wrong)
Are you at Donno? I'll be there (silver) come and see me and we'll have a chat.
Paul
Things to try include
Trying somebody elses boost guage (yours may be faulty)
(wild guess work here) but are you loosing boost pressure from anywhere? Do you have any whistling/whooshing sounds from under the bonnet?
You could also try plugging in another ECU from an STi2 to see if that helped.
I'm not saying that these are the most likely causes, but they are easy to check and cost no money
I'd offer you my ECU to try but as it's got a PE Phase 1 it would be a no go(map would be wrong)Are you at Donno? I'll be there (silver) come and see me and we'll have a chat.
Paul
29 February 2000, 06:43 PM
#7
Scooby Newbie
Join Date: Feb 2000
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
I had a similar problem last week which was caused by not connecting a pipe back properly.I was replacing my panel air filter with a K&N replacement,and in haste I left the pipe loose under the air chamber next to the air box.After following the pipe back it
looked as if operated some sort of air pressure valve which detects air flow through the intake.May a pipe has become loose or split in the same area?
I hope you find this of some use.
MARK
looked as if operated some sort of air pressure valve which detects air flow through the intake.May a pipe has become loose or split in the same area?
I hope you find this of some use.
MARK
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Car Parts For Sale
1
18 November 2015 07:49 AM