Help what turbo upgrade
#1
Guest
Posts: n/a
Im looking for more hp and ive looked at an aps40 Turbo which should suit the upgrade ive already had Im looking at alternatives to get the power upto around 410hp im also looking at larger injectors. can you help. listed below is the upgrades so far.
Aps dr500 fmic
aps cold air intake
aps 3.5 decatted exhaulys
gems ecu
Aps dr500 fmic
aps cold air intake
aps 3.5 decatted exhaulys
gems ecu
#7
TD05/06 combo from Andy F or Lateral Performance
Garrett/IHI Hybrid from Lateral Performance
Garrett/IHI Hybrid from iON Performance (Canada)
Probably your best options. 05/06 probably best VFM, Andy F is in scotland, Lateral in Hertfordshire, which may make the decision easier for you.
Paul
Garrett/IHI Hybrid from Lateral Performance
Garrett/IHI Hybrid from iON Performance (Canada)
Probably your best options. 05/06 probably best VFM, Andy F is in scotland, Lateral in Hertfordshire, which may make the decision easier for you.
Paul
Trending Topics
#10
VF22 md195 is for sale at a good price - peak power over 400bhp and 355lbs Torque at last count
Max power of 420bhp...... with headers, etc
Offers over £600......including uprated actuator
Max power of 420bhp...... with headers, etc
Offers over £600......including uprated actuator
#12
Dont have a compressor map - only ever seen one I think for the TD05/06
The Turbo was purchased from Turbo Dynamics in England (01202 487497) maybe they have one - I dont know?
Given that the cost was £1500 inc the uprated actuator I thought the Turbo was a bargain - especially as it was not that long ago given a 'make-over' by the boys at Roger Clark Motorsport
Hit 403bhp and 355lbs on my last run with the Turbo, prior to fitting headers at 1.6-1.65 bar. Turbo runs 1.8 Bar with 1.6-1.7 bar held on the rollers
I want a Turbo that could flow up to about 450bhp - the Turbo Dynamics one can probably do 410-420 tops - but I need the extra bhp!! - good though for someone on 'intermediate power' around the 350bhp -400bhp mark
The Turbo was purchased from Turbo Dynamics in England (01202 487497) maybe they have one - I dont know?
Given that the cost was £1500 inc the uprated actuator I thought the Turbo was a bargain - especially as it was not that long ago given a 'make-over' by the boys at Roger Clark Motorsport
Hit 403bhp and 355lbs on my last run with the Turbo, prior to fitting headers at 1.6-1.65 bar. Turbo runs 1.8 Bar with 1.6-1.7 bar held on the rollers
I want a Turbo that could flow up to about 450bhp - the Turbo Dynamics one can probably do 410-420 tops - but I need the extra bhp!! - good though for someone on 'intermediate power' around the 350bhp -400bhp mark
Thread
Thread Starter
Forum
Replies
Last Post