Anybody got any advice on fitting a new clutch to my95 typeRA preferabely a step by step guide,

i have fitted clutches before but only to front wheel drive cars
ie.RS turbos etc, and the 4 wheel set up seems a bit daunting!!

any help would be much appreciated!!

 

Dont forget to pull the clutch arm spindle out of the side of the box or you wont get the box off,and they dooo get stuck on the dowels

 

i done my clutch and i had never done one before it really isn't too hard although i took the engine out as i had the belt and plugs to do.

the clutch pivot pin on mine was very hard to get out everything else is just like any other car.

if you are taking the box out you have to punch the rolpins out the front driveshafts dont know how hard that is as didn't do it

good luck

 

YHM. Step by step guide to the job! Open it in Acrobat reader 'cos its a PDF.

Hope it helps,

Pete