APEXI turbo timer help
27 April 2003, 04:48 PM
#1
Scooby Regular
Thread Starter
Join Date: Nov 2002
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
Just purchased the above and I am having some trouble in fitting it. Can any one tell me what which wires should go which wire on the ignition, as knowing my luck I will get it wrong and end up engaging the starter motor or something
I have a 98 STI4 by the way
I have a 98 STI4 by the way
27 April 2003, 05:32 PM
#2
Scooby Regular
Join Date: Jul 2002
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
There are different of mounting, one is the timer will active when you have your brake handle pulled, the second option is the timer will always active.
I have choose the second option:
Red- constant power
Blue + green - on the wire when you have the ignition on "on"
White - 02 wire of the ecu
Black - ground
Grey - ground
I have separate the ground wires!!
Mike
I have choose the second option:
Red- constant power
Blue + green - on the wire when you have the ignition on "on"
White - 02 wire of the ecu
Black - ground
Grey - ground
I have separate the ground wires!!
Mike
27 April 2003, 05:34 PM
#3
Scooby Regular
Thread Starter
Join Date: Nov 2002
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
ok cheers for that, I am off next week so intend to have a go then. Will be in touch if I get stuck, Little bit dubious of connecting the O2 wire to the ecu as well
Thread
Thread Starter
Forum
Replies
Last Post