ECU wiring?
#2
the wire for the lambda signal is a fat white wire with silver stripes. this is the wire that the unit will read the mixture from.
is yours a 4 plug ecu, ie older car 1994 etc? if so, can tell you which plug and pin number the wire is in.
ian
is yours a 4 plug ecu, ie older car 1994 etc? if so, can tell you which plug and pin number the wire is in.
ian
#7
any switched live will do, my afr is on a switch live other than ecu too, works fine.
as for the afr, not familiar with the hks one. if its an led type, then all greens on full throttle should do.
scoobies run really rich from the factory anyway, and i dont think 1bar should be a problem.
ian
as for the afr, not familiar with the hks one. if its an led type, then all greens on full throttle should do.
scoobies run really rich from the factory anyway, and i dont think 1bar should be a problem.
ian
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM