Delta Dash question ???
#1
Another question (sorry)
On dd log I have no boost
Dya reckon its cos I am using the HKS evc....I am guessing the ecu is not receiving data back cos the evc is controlling the boost...
Anyone ?
On dd log I have no boost
Dya reckon its cos I am using the HKS evc....I am guessing the ecu is not receiving data back cos the evc is controlling the boost...
Anyone ?
#2
When you say you have no boost, can you be more specific about the problem ?
Do you mean that you can see a boost value in DeltaDash, but that it always reads 0 PSI ?
Or that you don't get a boost value shown at all ?
...or something else ?
Do you see an Atmospheric pressure value ? If so, what is the value displayed ?
What is the model of car ?
If in doubt, post a screen shot.
(Boost in DeltaDash is labelled 'Manifold Relative Pressure')
Cheers
Steve
Do you mean that you can see a boost value in DeltaDash, but that it always reads 0 PSI ?
Or that you don't get a boost value shown at all ?
...or something else ?
Do you see an Atmospheric pressure value ? If so, what is the value displayed ?
What is the model of car ?
If in doubt, post a screen shot.
(Boost in DeltaDash is labelled 'Manifold Relative Pressure')
Cheers
Steve
#3
Thanks for the reply Stephen, I shall explain....
Not my delta dash, car is uk99 ppp, when my scooby friend mailed me the logs I opened them all ok, but all the 'headings' are jumbled up in the top left of the page.
Given that I am having to guess the title at the top, the column I am presuming may not be the 'manifold rel pressure' at all (I am presuming 15th title equals 15th column).
What I am saying is; the column I think is 'mrp' is showing either a 1 or 0....maybe its not the correct column.
I shall try again later to make sense of it, dont worry about it for now
[Edited by Moles Dad - 9/22/2002 8:44:02 AM]
Not my delta dash, car is uk99 ppp, when my scooby friend mailed me the logs I opened them all ok, but all the 'headings' are jumbled up in the top left of the page.
Given that I am having to guess the title at the top, the column I am presuming may not be the 'manifold rel pressure' at all (I am presuming 15th title equals 15th column).
What I am saying is; the column I think is 'mrp' is showing either a 1 or 0....maybe its not the correct column.
I shall try again later to make sense of it, dont worry about it for now
[Edited by Moles Dad - 9/22/2002 8:44:02 AM]
#4
>all the 'headings' are jumbled up in the top left of the page.
>
Again, not sure what you mean - I can't see what you see on your screen !
What program are you opening the file with ?
If you are opening the file in a word processor, it's not going to be easy to read. The file is in CSV format, and I recommend using Excel, or just downloading DeltaDash from the web site - this will allow to to view previously recorded log files, even if you haven't bought the product.
1 or 0 is definitely the wrong column ! That will be a digital (on/off) parameter such as 'Rear defog switch state'.
Cheers
Steve
>
Again, not sure what you mean - I can't see what you see on your screen !
What program are you opening the file with ?
If you are opening the file in a word processor, it's not going to be easy to read. The file is in CSV format, and I recommend using Excel, or just downloading DeltaDash from the web site - this will allow to to view previously recorded log files, even if you haven't bought the product.
1 or 0 is definitely the wrong column ! That will be a digital (on/off) parameter such as 'Rear defog switch state'.
Cheers
Steve
#5
Stephen, its all smiles now....the files were corrupted
It now opens ok, it now makes sense
Another quality product on md shopping list
Thanks for your time, and nuff respect.
It now opens ok, it now makes sense
Another quality product on md shopping list
Thanks for your time, and nuff respect.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM