Just Fitted Downpipe
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2001
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Hello
I have just fitted a new downpipe to my MY2000 turbo.
Its not as bad as everyone makes out.
Okay the nuts that bolt to the turbo are very very tight but once they are off its easy. The hardest bit was doing up the nut on the stud at the bottom of the turbo with the open neck style downpipe.
If anyone else is thinking of doing it themselves I would say have ago, but don't quote me on that!
Regards
Steve
I have just fitted a new downpipe to my MY2000 turbo.
Its not as bad as everyone makes out.
Okay the nuts that bolt to the turbo are very very tight but once they are off its easy. The hardest bit was doing up the nut on the stud at the bottom of the turbo with the open neck style downpipe.
If anyone else is thinking of doing it themselves I would say have ago, but don't quote me on that!
Regards
Steve
#3
Drag it!
iTrader: (1)
Join Date: Jun 2002
Location: Flame grilled Wagon anyone?
Posts: 9,866
Likes: 0
Received 0 Likes
on
0 Posts
You obviously did not come across any cross threaded bolts, over torqued bolts.
The 1st 3 times i did dwonpipes, POP, got too cocky, next 3 times had the above. Angle grinder, lots of swearing, etc, etc.
The 1st 3 times i did dwonpipes, POP, got too cocky, next 3 times had the above. Angle grinder, lots of swearing, etc, etc.
Thread
Thread Starter
Forum
Replies
Last Post