Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

MY01 flat spot

Thread Tools
 
Search this Thread
 
Old 07 June 2002, 10:47 AM
  #1  
simes
Scooby Regular
Thread Starter
 
simes's Avatar
 
Join Date: May 2000
Posts: 625
Likes: 0
Received 0 Likes on 0 Posts
Post

Thanks all for the replies...

To clarify further, boost is held steady at 1 bar throughout.

It does do it in every gear, I don't think it's the drive by as I remember that from my old car, plus an ECU reset clears it.

Might try and find someone with a Delta Dash then...

Cheers

Simon

[Edited by simes - 7/6/2002 10:48:01 AM]
Old 05 July 2002, 03:12 PM
  #2  
simes
Scooby Regular
Thread Starter
 
simes's Avatar
 
Join Date: May 2000
Posts: 625
Likes: 0
Received 0 Likes on 0 Posts
Unhappy

When accelarating hard my MY01 has developed a noticeable flat spot between 4200 and 5200 rpm. It's quite distinct as if a switch has been flickd to retard the ignition right back at 4200, and then flicked again at 5200 rpm to advanced it again.

It has started doing this recently, and I have ran through a couple of tanks of fuel to ensure it's not a fuel issue. It has always been run on SUL.

The car has done this a couple of times before and an ECU reset has fixed it, but this time I would like to get an idea of exactly what is causing the problem rather than just blindly reset the ECU.

It'll be going to the dealers soon, but in the meantime has anyone got any ideas as to what may be going on?

It has Scoobysport decat D/P and C/S together with Prodrive B/B and ITG panel filter, but has done the same when exhaust was standard apart from the B/B.

Cheers

Simon
Old 05 July 2002, 03:19 PM
  #3  
DrEvil
Scooby Regular
 
DrEvil's Avatar
 
Join Date: Oct 2000
Location: Surrey, UK
Posts: 8,384
Likes: 0
Received 0 Likes on 0 Posts
Lightbulb

I found switching from a scoobysport mid section/bbox to an HKS mid/bbox fixed this... Didn't notice the flat spot before I decat'd the centre.

Rgds, Alex
Old 05 July 2002, 03:27 PM
  #4  
simes
Scooby Regular
Thread Starter
 
simes's Avatar
 
Join Date: May 2000
Posts: 625
Likes: 0
Received 0 Likes on 0 Posts
Unhappy

Thanks Alex, but I think it's different to what you were experiencing in that it's transient, i.e. an ECU reset fixes it.

And to clarify, when I say flat spot I mean the car feels like it's running at, say, 75% power, if that. There is a noticable kick at 5200rpm as full power comes back in.

Cheers

Simon

Old 05 July 2002, 05:35 PM
  #5  
DrEvil
Scooby Regular
 
DrEvil's Avatar
 
Join Date: Oct 2000
Location: Surrey, UK
Posts: 8,384
Likes: 0
Received 0 Likes on 0 Posts
Lightbulb

Simes,

What you have described is exactly what I saw.. the boost actually drops off to at circa 4200rpm to around 0.7-0.75 bar until circa 5000rpm then kicks in again to 0.95-1 bar.

Rgds, Alex
Old 05 July 2002, 06:14 PM
  #6  
Pete Croney
Scooby Regular
 
Pete Croney's Avatar
 
Join Date: Oct 1998
Location: Scoobysport, Basildon, UK
Posts: 4,300
Likes: 0
Received 0 Likes on 0 Posts
Post

Boost should be stable right through, so it may be a sensor on its way out. A Deltadash log would show up exactly whats happening.
Old 05 July 2002, 08:38 PM
  #7  
BugEyed
Scooby Regular
 
BugEyed's Avatar
 
Join Date: Aug 2001
Posts: 1,029
Likes: 0
Received 0 Likes on 0 Posts
Cool

Strange this - I bought my SS mid + back box from Alex (and had initially the same set up (an ITG)), and haven't found the problem, so agree with Pete that it is not the same problem. However, I'm running a trick to fool the MAP and suspect that this may be your problem. Check the output from a DeltaDash (or Select monitor) first, but if the problem continues drop me a mail off line.

Duncan
Old 05 July 2002, 08:39 PM
  #8  
Edward
Scooby Regular
 
Edward's Avatar
 
Join Date: Dec 1999
Location: West Yorkshire
Posts: 310
Likes: 0
Received 0 Likes on 0 Posts
Post

Simes, is this in every gear ? If not it could be something to do with the ECU reducing boost so the car passes the drive by noise test.

E.
Old 06 July 2002, 01:35 PM
  #9  
LoFi
Scooby Regular
 
LoFi's Avatar
 
Join Date: Feb 2001
Location: Surrey
Posts: 778
Likes: 0
Received 0 Likes on 0 Posts
Post

Simes, this is no help but I have exactly the same set up as you (but with significantly less miles on the clock - infact you were at Scoobysport when I had all the exhaust done) and I don't experience this problem. As i said no help whatsoever but I'd be interested to hear how you get on with a diagnosis.

Piers LoFi
Old 07 July 2002, 10:27 PM
  #10  
simes
Scooby Regular
Thread Starter
 
simes's Avatar
 
Join Date: May 2000
Posts: 625
Likes: 0
Received 0 Likes on 0 Posts
Post

Drove car today and it's back to normal, pulling strongly all the way through. Only a quarter of a tank left, so it's not due to change of fuel, and obviously no ECU reset.

What's going on
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stevebt
Was it you?
9
20 October 2015 09:14 PM
Cpt Jack Sparrow
Was it you?
7
05 October 2015 10:40 AM
the shreksta
Other Marques
26
01 October 2015 02:30 PM
wrxcook
ScoobyNet General
3
29 September 2015 09:17 PM
hawkeyescoob
ScoobyNet General
2
09 September 2015 12:03 PM



Quick Reply: MY01 flat spot



All times are GMT +1. The time now is 07:38 AM.