ecu
#2
Scooby Regular
Join Date: Nov 2000
Location: 32 cylinders and many cats
Posts: 18,658
Likes: 0
Received 1 Like
on
1 Post
What model year?
If MY99/00 look on www.ecutek.co.uk for the labels and identifiers.
PPP has a Pink STI sticker on the case (but the case label does not guarantee the ECU inside), on MY99/00 reports as AE801 to select monitor. PPP should run over 15.7 PSI.
If I wanted to check the genuine nature of a Prodrive ECU I would look at the label, open up the case and check the circuit board inside has no modifications - eg diodes soldered to the board. Check the boost pressure on the car was about 2 PSI over the standard ECU, and check with Delta Dash the model code, and the boost aim and achieve.
If MY99/00 look on www.ecutek.co.uk for the labels and identifiers.
PPP has a Pink STI sticker on the case (but the case label does not guarantee the ECU inside), on MY99/00 reports as AE801 to select monitor. PPP should run over 15.7 PSI.
If I wanted to check the genuine nature of a Prodrive ECU I would look at the label, open up the case and check the circuit board inside has no modifications - eg diodes soldered to the board. Check the boost pressure on the car was about 2 PSI over the standard ECU, and check with Delta Dash the model code, and the boost aim and achieve.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM