DCCD problems HELP!!!
#1
Scooby Newbie
Thread Starter
Join Date: Aug 2014
Location: preston
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
DCCD problems HELP!!!
Hi to all im new to the forum and to the subaru scene as i bought my first impreza ( 1998 sti type r v5 limited ). sorry if this has been covered before but im having dccd problems, when i start the car the top light on the dccd flashes then goes off and nothing appears on the dccd display even if i move the wheel up and down, if im quick when i start the car up i cn move the wheel and the dccd changes on the display bt then again goes off again. any help would be extremely handy, thanks
#2
Scooby Regular
iTrader: (29)
Join Date: Aug 2006
Location: aberdeenshire
Posts: 656
Likes: 0
Received 0 Likes
on
0 Posts
That's standard protocol when dccd ecu detects problem.
Most likely the wires are damaged where they enter top plate on transfer section of gearbox. Be worth checking the interior connections first including handbrake switch.
Most likely the wires are damaged where they enter top plate on transfer section of gearbox. Be worth checking the interior connections first including handbrake switch.
#3
Scooby Regular
iTrader: (5)
The is a sequence of things to do to get the light to blink a code to you, on newage you turn ignition on, operate parking brake, hold accelerator pedal down and scroll the thumb wheel between lock and open 20 times..... it then flashes a code
One long flash is 10 and a short flash is 1, then google your code.
Thats for newage anyway i dont know if its the same for classics but worth a try
One long flash is 10 and a short flash is 1, then google your code.
Thats for newage anyway i dont know if its the same for classics but worth a try
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM