PC ISSUE Hardware
15 December 2006, 08:33 PM
#1
PC ISSUE Hardware
Ok so when the power is turned on at the plug the hard drive kicks into life but with no picture on the screen. The power button doesnt work either, its on and off via the mains??
I've removed everything I can, cleaned all connections removed the motherboard from the case and removed and reconnected all the case wires ??????
Its doing my ****ing nut in now, it doesnt beep or anything just Proc fan comes on and the harddrive starts up... nothing on screen
I've removed everything I can, cleaned all connections removed the motherboard from the case and removed and reconnected all the case wires ??????
Its doing my ****ing nut in now, it doesnt beep or anything just Proc fan comes on and the harddrive starts up... nothing on screen
16 December 2006, 09:52 PM
#2
Pimmo,
Do you want to tell us a bit more about this? Is this a new PC you are building or an old one with a problem?
Have you tried booting off a bootable OS CD to see what happens?
WB
Do you want to tell us a bit more about this? Is this a new PC you are building or an old one with a problem?
Have you tried booting off a bootable OS CD to see what happens?
WB
16 December 2006, 09:54 PM
#3
Originally Posted by wacky.banana
Pimmo,
Do you want to tell us a bit more about this? Is this a new PC you are building or an old one with a problem?
Have you tried booting off a bootable OS CD to see what happens?
WB
Do you want to tell us a bit more about this? Is this a new PC you are building or an old one with a problem?
Have you tried booting off a bootable OS CD to see what happens?
WB
Booting to a CD
the BIOS doesnt even seem to load
16 December 2006, 10:03 PM
#4
Pimmo,
If the CMOS battery is ok then its the motherboard.
Last time this happened to me there was a break in the circuit board near the cpu.
Nothing else to do but to go for a new board & chip.
WB
If the CMOS battery is ok then its the motherboard.
Last time this happened to me there was a break in the circuit board near the cpu.
Nothing else to do but to go for a new board & chip.
WB
Thread
Thread Starter
Forum
Replies
Last Post
Phil3822
General Technical
0
30 September 2015 06:29 PM