JEFFS Werkstatt question?
#1
JEFFS Werkstatt question?
hi all iv recently clayed my new 03 sti (silver) then used JEFFS basecoat product (Prime Acrylic), followed by (Acrylic Jett Trigger). i also used the acrylic gloss to help me remove the basecoat.
i was well impressed with the finished quality but when i want to give it a quick wash or wipe over what am i meant to use, is it the gloss?
how often would you recommend me to use the three JEFFS products together (iv read claying is 6 monthly)
cheers guys
cocker92
i was well impressed with the finished quality but when i want to give it a quick wash or wipe over what am i meant to use, is it the gloss?
how often would you recommend me to use the three JEFFS products together (iv read claying is 6 monthly)
cheers guys
cocker92
#3
Scooby Regular
iTrader: (2)
Join Date: Feb 2007
Location: England
Posts: 1,131
Likes: 0
Received 0 Likes
on
0 Posts
Full instructions are on the Polished Bliss website mate,but as a rule of thumb......
Use the acrylic base every 6 months after claying.
Use the sealant as often as you want but generally needed every 4 - 6 weeks.I've just bought this system as well and have used it for 3 washes on the trot to build the shine up.Will now use every 2nd / 3rd wash.
The gloss can be used when and if needed,apparently is good for helping to dry off but not used it for this purpose as yet.I suppose it can be used whenever you need to,after every wash or just in conjunction with the sealant.
Hope this helps.
Use the acrylic base every 6 months after claying.
Use the sealant as often as you want but generally needed every 4 - 6 weeks.I've just bought this system as well and have used it for 3 washes on the trot to build the shine up.Will now use every 2nd / 3rd wash.
The gloss can be used when and if needed,apparently is good for helping to dry off but not used it for this purpose as yet.I suppose it can be used whenever you need to,after every wash or just in conjunction with the sealant.
Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM