Could anybody tell me a rough figure a 98 turbo 2000 will achieve safely with the following mods
Simtek Ecu
Vf 28
440 injectors
Ported headers
Hrc 290 fuel pump
K+n filter
Thanks

 

Around 320 give or take a few bhp.

 

Thanks tony any ideas how I can push it to 340 ish

 

You will need a front mounted intercooler, bigger injectors, bigger turbo (vf35 or similar), cold air induction kit, some nice supporting mods like decent brakes because at 208bhp the standard 2 pot brakes are abysmal.

Tony

 

Or a newage sti top mount will be more than efficient at that power level, also your yellow 440's will be around their limits as to what they can flow at that level of tune.

 

go with the list of mods you have and your gearbox will last a lot longer.

 

Have just purchased a set of brembos so brakes not a problem now lol just wanting the 340 power mark to go with them as I heard the internals won't hold much more ?

 

Im in the same boat as OP

I have got fitted to my 99 sti wagon

440's
vf28
k/n induction
3" de cat
Black brembo front brake conversion

But have got and ready to fit

550 injectors
walbro fuel pump
fmic
cold air feed from front fog cover
Ecutek ecu
Lateral headers (wrapped)
Lateral up pipe (wrapped)

Would mine make 340 once fitted with above or would it need a vf34/35 turbo to make a safe figure?

 

Which wheels do you have as brembo's wont fit under alot of wheels (have to be new age sti fitment wheels).

 

18's prodrive wheels and never thought about that one

 

hutchy if you bought baldy wheels the brembos will fit as they et48s