BHPvstorque

iTrader: (14)

Hello
I have just picked up a set of carbon front wings for my 1999 subaru impreza turbo classic. Got to take off the original items but not really sure where the bolts are to remove and is there anything i need outside of some spanners to swap ?
Sorry newbie who want to learn how to do some spanner work on my car but a bit clueless so please be gentle.. ha ha
Any advice would be very welcome.
Cheers,
Kris

Wolf_gsxr

There usually just bolts on the edge under the bonnet, one at the bottom and there's some small screws for the wheel arch liner. Also don't go mad when tightening them up on the carbon wings as they will most likely crack the resin and damage the weave underneath.

BHPvstorque

iTrader: (14)

Cheers for that going to try and fit them next weekend weather permitting.. ;-)

Bealescooby

iTrader: (36)

you have to remove the sidelight theres 2 there , 2 by the door shut 1 at the bottom of wing which you normally have to remove side skirt to get to and you 5 on the top