Exhaust
#2
Scooby Regular
Join Date: Aug 2010
Location: 35,000 ft
Posts: 692
Likes: 0
Received 0 Likes
on
0 Posts
The flange mounting from the backbox to the centre pipe are at different angles on both models unfortunately, so they won't fit..
but you can cut the flange off and re weld it at the correct angle (on turbo backbox), or you can elongate the holes on the turbo backbox flange to make it fit
elongating the holes is not guaranteed to make it fit though..
and it will sound as flat as a fart with just the bb! you'll need to get a set of uel headers to get the scooby growl.. thats what gives it the characteristic sound. personally I'd start with a set of uel headers and go from there mate
but you can cut the flange off and re weld it at the correct angle (on turbo backbox), or you can elongate the holes on the turbo backbox flange to make it fit
elongating the holes is not guaranteed to make it fit though..
and it will sound as flat as a fart with just the bb! you'll need to get a set of uel headers to get the scooby growl.. thats what gives it the characteristic sound. personally I'd start with a set of uel headers and go from there mate
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM