mwinter7

Hi,
I will be fitting Brembo discs and calipers to my WRX in the near future with the help of a mate. Im not the most mechanically minded so could anyone tell me sizes of the nuts and bolts and any specific tools that i may need to make life a bit easier.
Cheers

alcazar

iTrader: (2)

Set of decent larger Allen keys.

Socket set.

WD40.

Copper Eaze.

MAYBE water pump pliers.

Some flexible brake pipe clamps IF yours aren't braided.

P1 NUT

iTrader: (1)

Just put Ap's on my classic. I needed the following:

Breaker bar
10mm alan socket set
10+11mm brake spanner
Copper grease

An easy job to do m8

alcazar

iTrader: (2)

Aye, I forgot the breaker bar........having a six-foot son who is a plater by trade helps too

mwinter7

cheers for the replies chaps

Dark

iTrader: (1)

Make sure the threads on the Brembo caliphers are in good condition; they often strip when being removed and require a helicoil insert. I think the same can happen to the bleed screws too.

Mark

Pink_Floyd

Yep. Get as much penetrating spray on all the bolts you are moving