I really need some help with a problem I've got fitting an engine. Basically I have a 97 uk 2000 turbo (the engine has the central coil pack) which has a noisey engine. I have bought an engine from another 2000 turbo but this one has the coil pack off centre to the right.
I have the original wiring loom for the engine but they are different connectors and the new engine has different sensors on the Inlet manifold
basically what I want to know is if there is any way to adapt this new loom to fit the connectors on the car

Thanks in advance

mark

 

If it is only different sensors on the manifold would it not be easier to swap the parts over from your original engine so you can use the original loom.

 

It's not that Simple unfortunately as the idle control valve is completley different, as are the connectors for the coil pack and what I assume is the throttle position sensor