Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

bluepoint or luk clutch ????

Thread Tools
 
Search this Thread
 
Old Jun 17, 2009 | 07:33 PM
  #1  
SNAP-ON's Avatar
SNAP-ON
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Jun 2006
Posts: 564
Likes: 0
From: sussex
Default bluepoint or luk clutch ????

my blobeye wrx needs a new clutch and ive been ringing around and can get a bluepoint clutch kit which ive been told is made by exedy and could also be a genuine subaru one in the box too , as exedy , blue point , adl and subaru are all the same units ? i can get the kit for £185+vat with 2yr warranty or an luk clutch kit for around £200+vat !
i know from past that luk are good but i also fitted a bluepoint kit to mu old 94wrx and didnt think much of it as it had a high biting point !
which would you use or am i better of going exedy organic ?
Reply
Old Jun 17, 2009 | 08:38 PM
  #2  
deangtiuk's Avatar
deangtiuk
Scooby Regular
iTrader: (3)
 
Joined: Jan 2008
Posts: 564
Likes: 0
From: Wolves
Default

Both are good manufacturers If you have high BHP or are pretty harsh on the Clutch I'd go Organic. Out of the both I'd go ADL Blue point as they are pretty much OEM.
Reply
Old Jun 18, 2009 | 08:41 AM
  #3  
ZEN Performance's Avatar
ZEN Performance
Former Sponsor
 
Joined: Jul 2005
Posts: 2,859
Likes: 0
From: Wellingborough, Northamptonshire
Default

niether.

The ADL clutch is far from OEM, it is not made by Exedy unless they have changed it recently.
Reply
Old Jun 18, 2009 | 10:17 PM
  #4  
SNAP-ON's Avatar
SNAP-ON
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Jun 2006
Posts: 564
Likes: 0
From: sussex
Default

Well i had a long chat direct with exedy today and he said the same , that adl , bluepoint , oem are done by them and are just reboxed by different companys which sometimes use different covers but are all purchased from them . also after speaking to cpa today he said thet if i oreder a bluepoint/adl in it will prob have subaru wrote on the clutch cover etc !
anyway if you guys wouldnt go with the above what would you recommend ?
Reply
Old Jun 18, 2009 | 10:32 PM
  #5  
deangtiuk's Avatar
deangtiuk
Scooby Regular
iTrader: (3)
 
Joined: Jan 2008
Posts: 564
Likes: 0
From: Wolves
Default

I've bought a ADL Blueprint part before and on the box i've pulled there sticker off and the original sticker on the box was a subaru part number sticker???
Reply
Old Jun 18, 2009 | 10:56 PM
  #6  
SNAP-ON's Avatar
SNAP-ON
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Jun 2006
Posts: 564
Likes: 0
From: sussex
Default

yep all made by the same but reboxed for some reason ?
Reply
Old Jun 19, 2009 | 08:58 AM
  #7  
scoobzie's Avatar
scoobzie
Scooby Regular
 
Joined: Jun 2007
Posts: 374
Likes: 0
From: here
Default

this is a good buy it will fit yours with a little modification

Exedy 6 Speed Clutch And Lightened Flywheel - Subaru Impreza Drivers Club
Reply
Old Jun 19, 2009 | 08:58 AM
  #8  
ZEN Performance's Avatar
ZEN Performance
Former Sponsor
 
Joined: Jul 2005
Posts: 2,859
Likes: 0
From: Wellingborough, Northamptonshire
Default

We've only ever had one ADL clutch, the cover pressing was probably exedy, but the friction plate and everthing else was not. The friction plate hub was completely different, different friction material etc, it was NOT a reboxed exedy unit.

Exedy have the patent on the pull type clutch mechanism and release bearing that you find on many Jap clutches, this is just one reason why so many are just made fron Exedy components.
Reply
Old Jun 20, 2009 | 05:00 PM
  #9  
SNAP-ON's Avatar
SNAP-ON
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Jun 2006
Posts: 564
Likes: 0
From: sussex
Default

Zen what clutch would you recomend and cost etc ? i spoke again with exedy direct and they dont seem to list a clutch kit for the 03-05 model ? they list the classic and newage up to 02 but not a full kit for 03-05 as they dont list a cover ? he thinks it will be the same kit as the 02 models use as the plate and thrust bearing are listed the same but they have no listing for the cover and want the number of my old cover to cross it over as they dont know if the 02 cover has the same clamp load as the 03-05 model and dont want to supply me with a wrong kit !
Reply
Old Jun 21, 2009 | 01:03 PM
  #10  
Aztec Performance Ltd's Avatar
Aztec Performance Ltd
Former Sponsor
iTrader: (234)
 
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Default

5 speed gearbox = 230mm
6 speed gearbox = 240mm

Reply
Old Jun 25, 2009 | 11:55 AM
  #11  
Aztec Performance Ltd's Avatar
Aztec Performance Ltd
Former Sponsor
iTrader: (234)
 
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Default

We've got Exedy Organic Clutches back in stock now.

Just drop me your model/year on PM or email aztecperformance@gmail.com for price.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM
Peedee
Drivetrain
4
Sep 29, 2015 09:41 PM
dovey963
ScoobyNet General
0
Sep 28, 2015 08:20 PM
Pro-Line Motorsport
Car Parts For Sale
0
Sep 27, 2015 11:23 AM
Scooby_Lee101
General Technical
3
Sep 26, 2015 12:04 AM




All times are GMT +1. The time now is 11:06 AM.