Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

Is it my diff or am I being over precautious????

Thread Tools
 
Search this Thread
 
Old Nov 10, 2008 | 09:33 AM
  #1  
scooby_wrx1984's Avatar
scooby_wrx1984
Thread Starter
Scooby Regular
 
Joined: Apr 2008
Posts: 226
Likes: 0
Default Is it my diff or am I being over precautious????

Morning All,

I have a 2001 WRX and I was on my way into work today I noticed that there is a noise coming from the rear end when I turn the wheel to the left (either alot or a small amount). The noise actually sounds like a bearing noise but when I touch the brakes the noise stops then when I let off the pedal the noise comes again after a couple of secs/minutes. The noise also only happens when I have been driving the car for a bit and have used the brakes a bit.

I am hoping this issue is to do with a sticky brake pad or summat like that, but part of me thinks there is an issue with the Diff.

Can anyone offer any opinions or had this happen to their car?

Cheers for any help

Craig
Reply
Old Nov 13, 2008 | 06:17 PM
  #2  
mbayley77's Avatar
mbayley77
Scooby Regular
iTrader: (4)
 
Joined: Jan 2005
Posts: 736
Likes: 0
From: Devon
Default

I have a similar thing on mine and am pretty sure its a bearing gone. This is number two in 12 months! But this was a second hand hub assembly.

Mine also only happens after a while of driving and can only think its the heat soak and expansion rates making something noisier.
Reply
Old Nov 18, 2008 | 12:44 PM
  #3  
The rookie's Avatar
The rookie
Scooby Regular
iTrader: (1)
 
Joined: Feb 2006
Posts: 2,099
Likes: 0
From: Warwickshire, UK
Default

What your describing is classic brake pad drag, the pad is just lightly brushing the discs and it starts to vibrate and 'sing' the fact it goes away with the lightest touch on the pedal confirms this, you can often play tunes on it by turning the wheel one way or another with differening lateral G's making the pressure between pad and disc higher or lower. It often fixes itself, or you can rmove the rear pads, clean out the channels and the edge of the pads and refit.

Simon
Reply
Old Nov 25, 2008 | 07:35 PM
  #4  
mbayley77's Avatar
mbayley77
Scooby Regular
iTrader: (4)
 
Joined: Jan 2005
Posts: 736
Likes: 0
From: Devon
Default

Mine was defo the wheel bearing as now all gone.
Reply
Old Nov 26, 2008 | 05:04 AM
  #5  
The rookie's Avatar
The rookie
Scooby Regular
iTrader: (1)
 
Joined: Feb 2006
Posts: 2,099
Likes: 0
From: Warwickshire, UK
Default

Did you do the bearing yourself?

Synical hat on, garage charge for changing bearing while cleaning up the brakes (they have to strip out to change the bearing) at the same time....

Simon
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
radave
Subaru Parts
2
Jul 16, 2016 02:19 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM
WrxSti03
Drivetrain
0
Sep 30, 2015 10:24 PM
WrxSti03
Drivetrain
11
Sep 29, 2015 10:21 AM




All times are GMT +1. The time now is 08:59 AM.