overboosting
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Jun 2007
Posts: 1,845
Likes: 0
From: throwing pieces oot a 20 storey flat
what would cause my car to overboost.if i give it half throttle boost guage will stay at 1.0 bar all the way to 7k+ but if i floor it then it rises to 1.5,garage cant find anything wrong when it was plugged into their computer,cars just been rebuilt and i dont want it going pop.cars basically standard,vf28 standard vta,backbox,downpipe etc anything i can check cos im at a loss here
Scooby Senior
iTrader: (3)
Joined: Jun 2006
Posts: 14,333
Likes: 0
From: Slowly rebuilding the kit of bits into a car...
What did it boost to before ?
I managed to get the boost restrictor pill in the wrong place on re-fitting mine.... for the third time !
See thread - boost restrictor pill (halfway down page 1 !
HTH
DunxC
P.S. Mine goes to 1.55 bar from a rolling start, but never reaches that from a standing start.
I managed to get the boost restrictor pill in the wrong place on re-fitting mine.... for the third time !
See thread - boost restrictor pill (halfway down page 1 !
HTH
DunxC
P.S. Mine goes to 1.55 bar from a rolling start, but never reaches that from a standing start.
Last edited by dunx; Jun 22, 2008 at 04:02 PM.
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Jun 2007
Posts: 1,845
Likes: 0
From: throwing pieces oot a 20 storey flat
dont know just had a boost guage installed to keep an eye on things.Surely 1.5 bar is way too much boost for a standard car?why doesnt it hit fuel cut or is there no cut on later classics?
Scooby Senior
iTrader: (3)
Joined: Jun 2006
Posts: 14,333
Likes: 0
From: Slowly rebuilding the kit of bits into a car...
Try to borrow another gauge, check it is accurate !
Otherwise, I'm no expert on classics, but check out the boost restrictor location in the plumbing...
Sorry,
DunxC
Otherwise, I'm no expert on classics, but check out the boost restrictor location in the plumbing...
Sorry,
DunxC
Thread
Thread Starter
Forum
Replies
Last Post
Rikki23
ScoobyNet General
5
Jan 8, 2001 03:40 PM



