Just checked my ecu and found it to be a Z4 with a Mines Plaque on it. Ive looked up the info on the Mines ecu and it doesnt looked go.
Here comes the but, my boost runs at 0.95 bar without the dawes fitted. The car pulls all the way in all gears on esso super unleaded, no splutters or anything. The 112mph speed limit is still there.
The ecu case is still sealed. The car exhaust pops now and then, more if I drive it hard coming off boost or changing down gears.
So far the car is setup with the dawes fitted and set to 1.05 bar, front mount intercooler, apexi air cone, ihi turbo and oil cooler. Also fitted a de-limter to the speedo head.

What do I do here ?, replace the ecu, leave it like it is, fit a ecu chip.

Help...

 

If you don't mind spending some money I'd definitely recommend getting a new ecu, power fc seems to be the one to get. That way you can have the car set up properly and will be the better option in the long run.

 

Right ive opened the ecu to have a peak inside:















What does all that writing mean ?