as title says, have 1 but no instructions on where to connect 2 - help please!

 

Click here mate

 

doesnt seem 2 work

 

Search for boost + gauge + fitting post by wrxcity

 

must of been removed as link 4 classic doesnt work, cheers anyway m8.

 

The vacuum pipe needs to be fitted to the inlet manifold, on a classic you should be able to plumb it into one of three small brass outlets on the drivers side branch below the intercooler hose connection.

You may need a plastic or metal T piece as you may need to cut a pipe to T off.

Then you just need an earth and lights live feed for your illumination.

Pass your vacuum pipe through the speedo cable grommet.

Lee DT.

 

mine goes to the left hand brass gromit as you look at the engine right hand one from the drivers seat

 

Yep, look on the front n/s of the inlet manifold. My classic had a rubber cover over a brass union. Simply remove the cover, (put it somewhere safe), and replace it with the boost gauge piping.

Alcazar