I know this is much talked about because ive read most of the posts! But...


ive now got a set and fitted them (with the correct switch) but they dont work.

You can adjust the mirrors but the folding action doesnt work.

The mirrors have 6 wires coming from them, the loom has 5. Does anyone know where that 6th wire should go?

I havent checked the back of the switch yet, thats for later.

 

HELLO OLLIE DID YOU HAVE ANY LUCK AS IVE COME ACROSS SAME PROBLEM
CHEERS KIP

 

JUST FOUND THIS LINK THAT HAS SORTED MY PROBLEM MIGHT HELP YOU ASWELL https://www.scoobynet.com/folding-mi...olding+mirrors
CHEERS KIP

 

Kip, i think i love you!

My mirrors have the 5 wires coming out of them already so half the loom is there, just got to wire it to the connector in the footwell (which is what was confusing me all this time!)

 

NO PROBLEM I WAS TOLD I JUST HAD TO PLUG EM IN AND AWAY YOU GO NO SUCH LUCK GONNA HAVE A GO TOMMORROW SO ILL LET YOU KNOW HOW I GET ON
KIP

 

HERES ANOTHER ONE FOR YOU
http://www.northursalia.com/modifica...dmmirrors.html
PICTURES HELP ON THIS ONE
KIP

 

MIRRORS ALL UP AN WORKING WASNT THAT BAD TO DO LONGEST BIT WAS GETTING WIRE THROUGH GROMMET
KIP

 

How did you get that done in the end?
Im trying to put some decent speaker wire through and have had to slip it out the side of the grommet as is leaves the car and then back in through the side of the one on the door (if that makes sense?)

 

Hello i undone tape either end and popped grommets out slide wire through grommet and ran wire on outside back in through grommet and then taped up whole lot to make look tidy

Bit fidley as not alot of space
kip