I HAVE A 94 WRX IMPORT WITH A 2.5 IMPLANT. I BOUGHT AN ECU OF EBAY A BIT BACK WITH A SCOOBYECU IN IT A V7 ECU. THE CAR WONT RUN WITH THE J1 CUT SO AS TO RUN THE SCOOBY ECU BUT WHEN I JOINED THE J1 BACK UP AND REMOVED THE SCOOBYECU THE CAR RUNS FINE ONLY THE CHECK ENGINE LIGHT COMES ON AND THE HAND BRAKE LIGHT BUT THE HAND BRAKE LIGHT ONLY STAYS ON FOR ABOUT 5 TO 10 MINS. WHEN I CHECK THE ECU CODES IT SHOWS CODE 35 WHICH I BELIEVE IS PURGE CONTROL SOLENOID VALVE. BUT I DON’T KNOW WHAT THAT IS OR WHERE TO FINED IT OR IF MY CAR HAS ONE AND I DON’T SEEM TO BE ABLE TO RESET THE ECU IV TRIED SEVERAL TIMES NOW. OH AND ONE OTHER THING THE SPEED LIMITER HAS DISAPPEARED WHEN I PUT MY FOOT DOWN THE NEEDLE JUST STOPS ON THE TRIP RESET AT ABOUT 115MPH BUT THE REV COUNTER JUST KEEPS ON GOING WITH NO LIMITER AND IV NOTICED THAT MY DETTING PROBLEM SEEMS TO HAVE GONE I CAN WINED THE BOOST UP TO OVER A BAR NOW WITH NO DETTING WHERE AS BEFORE WITH MY STANDARD W6 ECU I COULD ONLY GET TO ABOUT .8 BAR AT MOST. CAN ANY ONE COMMENT ON THIS AS TO WHERE TO FINED THIS PURGE CONTROL VALVE SOLENOID? HERE IS A PHOTO OF THE ECU I HAVE FITTED IF ANY ONE CAN TELL ME THE EXACT CAR ITS OUT OF AND IF IT’S A UK OR AN IMPORT
[IMG][/IMG]