HI, JUST FITTED A PAIR OF MORETTE HEADLIGHTS TO MY CAR. MY02. ONLY THING IS THAT THE BONNET DOESNT SEEM TO WANT TO SHUT?

ANY IDEAS

THANKS
TRACY

 

BTTT

 

What does BTTT mean?

 

Brought To The Top.....

 

Any chance of posting up some shots of the installation? Trying to think how the Morette's could foul the bonnet.

Incidently - remove the caps lock. Stops people thinking you're SHOUTING

Chris

 

hi,

thanks for response. there seems to be some foam sponge ontop of the lights that touch the bonnet when trying to close. - is this normal - or shouldnt it be there?

tracy
x

 

THIS IS THE PICI
http://i79.photobucket.com/albums/j1...Photo-0031.jpg


THE left hand side is the one i have the problem with

 

what problem from that picture it all looks ok

 

doesn't look like a problem to me mate

 

I had a similar problem on a MY04 with genuine Scoobie acessory morette type lights. It just touched the bonnet enough to stop it sitting right.

Couldn't see what was touching so painted snopake on the bits that looked like they might touch and drove round for a day. That night you could see what was touching as the snopake was rubbed off. It was a sort of flange on the mounting bit. Sliced a chunk off with a scalpel and it's been OK for the last two years.

 

Seems fine but you can loosen the light and move it about a bit, to get a better fit etc, also the covers can also be moved I think, separate from the light case,

 

Just had the same fitted to my '01 WRX, looking at your pic, it seems like mine sit slightly further forward, stick out more as it were, but not by much. It's hard to tell from a piccie. If you want photo of mine, let me know and I'll get some in the daylight.