im after an uk ecu. im running a tdo5, so this ecu would need to to be the right one for it. before i had a 7d ecu, till i got a z4. all im after is an ecu with early boost from 2500 revs to at least 6500 revs. i now uk one are 11.47 psi. my car is a 95 uk. will pay £50 quid cash for one. i would colect today if not to far from notts. must be in good con, i would pay a little more depending which model. pm with details.

 

the ecu has to be for a turbo. as said in last message. i had a 7d uk one. i will sell the z4 if i can get a desent uk ecu that works a tdo5. it has the four plug type. i can get one for £75 from scooby bits so im offering £50 plus eather pick up/post. pm ye.

 

btt

 

all the uk cars were fitted with the td04 turbo except the p1 but had a different turbo all together

 

for some reson, my car has a td05. i was running a 7d ecu, seemed to work fine. if i can get an ecu witch works with my car. i'll be happy. my car runs fine now, but i dont like the limitor. as long as the car has boost from 2500 revs, i'll be happy.

 

Codswallop.

<97 UK saloon cars were all fitted with TD05.

HTH
Ritchie.

 

thats what i thought to.
still, im now thinking of getting a chip now.

i keep getting told that these z4s are the daddys and that with a chip. there even better.

 

Can you pu the z4 ecu on any scoob then??

For example I have a uk 96 with a 7D, which is now faulty, so am looking for a replacement!

 

If you are chipping your ecu it does not make it any better using a z4 compared to another as you will be running off the chip settings not z4 . Out of the standard ecu's for the td05 the z4 is considered the best , highest boost target with fueling .

Mark

 

this is true, the only thing about this z4 i hate is. the speed limitor + it runs on higher octane levels. it uses more fuel than if i run a uk ecu. if i found some thing that just changed the fuel & the limitor, then thats what i would do. regards the chip. the person who does the chips sets them different to the cars thay go in. and the £250 fully maped, is a bargin. all the chip does change is the limitor/ the fuel & the boost levels. but uses the standard map for the rest. thats why i say better with the z4. you now having the pro drive map. well i havent decided yet, persons keep asking about swoping. but i could get a standard ecu for £75 quid from scooby bits, i could sell this z4 for a lot more.

 

if no one will sell me a 7d uk ecu. then i'll end up chipping the z4, i'll pay £50 quid for it. unless i get some good offers for this z4 on a part chop. as i said, i can get a 7d for £75 at scooby bits. but the z4 i paid a lot more for it.

 

got a uk 97 if its any good to you...

 

hi, thanks for the offer. i dont thing that it would fit. the last 97 one i tryed was a three plug one. mign has four. + some four plug one dont work. again thanks.