Instructions for removal of exhaust
Originally Posted by RON
Unless you're taking the downpipe off, it's really simple, and unless you're a complete dunce, you won't need instructions....
In which case remove the system from the bottom of the downpipe first, then you'll need to remove the intercooler, and then the heatsheild from around the turbo, which can be a little awkward, but on a new car you shouldn't have any bolts that don't want to come undone, but a 10mm ratchet spanner is very handy!!!
Then once the shield is off, you'll find 3 17mm nuts, and 2 nuts and bolts, once they're undone, and you disconnected or removed the lambda sensor, the support bracket underneath if there is one, then it'll come off!!!
Then once the shield is off, you'll find 3 17mm nuts, and 2 nuts and bolts, once they're undone, and you disconnected or removed the lambda sensor, the support bracket underneath if there is one, then it'll come off!!!
Thread
Thread Starter
Forum
Replies
Last Post
Flat4x4-again
General Technical
2
Sep 29, 2015 06:32 PM



