Breather hose size/diameter?

Reply Subscribe

Thread Tools

Search this Thread

Apr 10, 2005 | 07:32 PM

Welloilbeefhooked

Thread Starter

Scooby Regular

iTrader: (3)

Joined: Sep 2003

Posts: 3,577

Likes: 0

From: Sheffield

Breather hose size/diameter?

I'm going to vent both of the pipes that feed nasty oil vapour into the inlet hose that runs under the manifold to the turbo. I am getting a bit of oil in the IC.

Anyone know what size T-Pieces I need to buy?

Cheers,

Wayne.

Apr 11, 2005 | 01:36 PM

scooby-k

Scooby Regular

Joined: Sep 2002

Posts: 1,435

Likes: 0

From: midlands

Hi Wayne. I turned the rubber elbow from crankcase through 180 degrees and used a 1/2" straight connector to connect to 1/2" bore hose. It was a good fit and did not need any clips.
ken

Apr 12, 2005 | 08:23 AM

Welloilbeefhooked

Thread Starter

Scooby Regular

iTrader: (3)

Joined: Sep 2003

Posts: 3,577

Likes: 0

From: Sheffield

Quote:

Originally Posted by scooby-k

Hi Wayne. I turned the rubber elbow from crankcase through 180 degrees and used a 1/2" straight connector to connect to 1/2" bore hose. It was a good fit and did not need any clips.
ken

Thanks Ken!