HI guys , does anyone know where I can buy some longer wheel bolts for the P1 ( apart from Prodrive ...they want £500 for 20 ! ).......it is because I had the AP 355 6 pots fitted and the Oz will not clear the calipers, so had spacers fitted but now need longer wheel bolts .
wheels are 18" Oz superleggeras .

thanks

 

I bought some from a place in Cardiff , they were about £2 each , I will dig out the invoice for the details

 

Good practice for this fine thread recommends at least 9 turns. I've bought some new longer studs from www.trackstore.co.uk (Part no.SS41:12mm x 1.25 Subaru/Nissan**. 63mm long stud). I cut 15mm off to prevent the dome nuts bottoming out before the wheel is fastened. I'm now getting at least 12 turns per nut. You can buy the deeper dome nuts from track store too.

Fitting is quite easy too.

Regards,

Ian

 

£2 EACH ! IT COST ME £11 PLUS VAT EACH (20 x 11 PLUS VAT =250 )

but thank for the info guys.....abit late though

live and learn !

 

???????? £11/ each were they gold plated?? what make are they??

we do these all the time for the grpN/A cars and std price is about the £2 mark (as posted)..............nuts very similiar.............

alyn

 

send them back and get them from Alyn then !

 

Abit late now .....but will give you a ring next time

thanks...............Mike