What's had a hole smashed/blew in it?
Hello gents,
Can y'all have a look at the photos below and tell me what's gone pop. I was pootling along at about 70ish on the motoway, put my foot down in 5th, car hesitated a bit and bang tried to limp off motor way and oil light came on and engine died. Car is a UK Turbo, was rebuilt 10k ago with high comp pistons and GEMS about 300bhp
Hole is under front edge of intercooler is it the gearbox or engine?
Cheers


Car for sale as is, ideal project for someone see here...
http://bbs.scoobynet.co.uk/showthrea...49#post3962549
Can y'all have a look at the photos below and tell me what's gone pop. I was pootling along at about 70ish on the motoway, put my foot down in 5th, car hesitated a bit and bang tried to limp off motor way and oil light came on and engine died. Car is a UK Turbo, was rebuilt 10k ago with high comp pistons and GEMS about 300bhp
Hole is under front edge of intercooler is it the gearbox or engine?
Cheers
Car for sale as is, ideal project for someone see here...
http://bbs.scoobynet.co.uk/showthrea...49#post3962549
Last edited by V45DSM; Nov 12, 2004 at 01:49 PM.
I can see a conrod, that's very bad.
Your engine is fubar, sorry.
Don't try and start it.
To add, it's a hole in your block, and you likely have a snapped rod, probably caused by a failed big end that seized.
Your pistons may have survived, but your going to need a new crank, rods and block at the very least. possibly a new piston or two, and possibly some new valves. Also new oil cooler matrix (old one may have metal debrid in it). SO it's full engine rebuild/replace time.
paul
Your engine is fubar, sorry.
Don't try and start it.
To add, it's a hole in your block, and you likely have a snapped rod, probably caused by a failed big end that seized.
Your pistons may have survived, but your going to need a new crank, rods and block at the very least. possibly a new piston or two, and possibly some new valves. Also new oil cooler matrix (old one may have metal debrid in it). SO it's full engine rebuild/replace time.
paul
Last edited by Pavlo; Nov 12, 2004 at 01:24 PM.
Trending Topics
Originally Posted by Andy.F
Bad news mate
Did you use anti lag on this as a matter of interest ?
Andy
Did you use anti lag on this as a matter of interest ?
Andy
Cheers,
Originally Posted by ozzy
Sorry to hear about your problems. Some cars/drivers just have no luck whatsoever.
Out of interest, how much woold it cost for a 2nd-hand MY99/00 UK engine?
Stefan
Out of interest, how much woold it cost for a 2nd-hand MY99/00 UK engine?
Stefan
http://bbs.scoobynet.co.uk/showthrea...ht=sale+engine
Former Sponsor
iTrader: (4)
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Originally Posted by jonny gav
have you seen a knocklink when anti lag is used, its very festive 

Sorry to see another engine gone V!!!
Buy that £500 engine and sell the car as one you will get more money back than selling it with a blown engine.
Thread
Thread Starter
Forum
Replies
Last Post
Wingnuttzz
Member's Gallery
30
Apr 26, 2022 11:15 PM




