Has anyone got any pics of a HKS SQV on a classic MY99-00
Scooby Regular
Joined: Jun 2002
Posts: 2,037
Likes: 0
From: The home of the game played with odd shapped balls
the actual Dump valve is tha same for any application the part you need to make sure is right is the flange for mounting it on the car. If you have the right mounting flange/kit then it'll be no Problem.
If not do not despair
I bought a HKS SSQV with a "Universal fitting kit" from ebay and it was the wrong fitting for my car mine was a 95 wrx. It took me ages to find a suitable flange as you can not buy them from HKS or thier suppliers. I had to blank off the apature on the front of the my latter TMIC and use an off shoot on the y pipe under the TMIC, using a piece of silicon hose and a flange I got from the states.
heres the supplier in the states:
http://www.maxspeed-motorsports.com/ssqvadap.html
These are the dif flanges he does for the HKS ssqv availabe in
3/4",
1",
1 1/2",
1 3/8"
If not do not despair
I bought a HKS SSQV with a "Universal fitting kit" from ebay and it was the wrong fitting for my car mine was a 95 wrx. It took me ages to find a suitable flange as you can not buy them from HKS or thier suppliers. I had to blank off the apature on the front of the my latter TMIC and use an off shoot on the y pipe under the TMIC, using a piece of silicon hose and a flange I got from the states.
heres the supplier in the states:
http://www.maxspeed-motorsports.com/ssqvadap.html
These are the dif flanges he does for the HKS ssqv availabe in
3/4",
1",
1 1/2",
1 3/8"
Last edited by Krade; Nov 8, 2004 at 04:15 PM.
Scooby Regular
Joined: Jan 1999
Posts: 1,293
Likes: 0
Some I did a little while ago (excuse the messy engine bay, it has since been cleaned (quite a few times))!
http://www.scoobycity.co.uk/phpBB2/v...+picture+valve
http://www.scoobycity.co.uk/phpBB2/v...+picture+valve
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
Jan 11, 2021 03:08 PM
blockhead
Subaru Parts
19
Nov 7, 2015 11:50 PM