i have removed the 5 or six nuts from in the car. but i can see three nuts under the lights how do i get to these will i have to remove my hole rear bumper

 

which model ?
on my classic , you remove the 5,not 6 nuts then undo the wiring connector and pull them out,ba5tard to pull out cuz of the seal AND they got to come out even,i tapped the studs GENTLY with a hammer till it moved then it was quite easy , another way is to wrap a flat screwdriver in a cloth and prise them out from the outside,being carefull not to mark the body of course.
not sure what these extra 3 nuts are though . .
ive changed mine 5 times now and have had no major problems..

daz

 

is on a classic 2 mate cheers will give it a go tomoz

 

If u get a hairdryer on it to melt the sealant for about 10mins its loads easier.

 

agree with that as well,,just make sure you re-seal it 100%
un-like someone not too far away :-(

believe me,they leak....