Cam Pulley
Thread Starter
Scooby Newbie
Joined: May 2004
Posts: 23
Likes: 0
Cam Pulley
Guys
Im trying to change the timing belt on a MY99, only thing is to remove teh timing belt guard, you have to take the Pulley off
To do this you need a special scooby tool, but Im sure it must be possible to create a tool of similar kind.
Would any of you guys have done this, and if so what do you use to remove the damn pulley
Cheers
Jonathan
Im trying to change the timing belt on a MY99, only thing is to remove teh timing belt guard, you have to take the Pulley off
To do this you need a special scooby tool, but Im sure it must be possible to create a tool of similar kind. Would any of you guys have done this, and if so what do you use to remove the damn pulley
Cheers
Jonathan
Scooby Regular
Joined: Nov 2001
Posts: 15,239
Likes: 1
From: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
You dont need to remove any cam pulleys to change the belt.. if your on about the crank pulley you can lock it with two 3/8th extension bars pushed into the holes with a bar inbetween and a 22mm socket on..
Or use an impact gun, or impact driver..
Cam pulleys can be removed with a 14mm socket and impact gun, or impact driver, the cams can be locked by using a 26mm spanner (iirc)
David
Or use an impact gun, or impact driver..
Cam pulleys can be removed with a 14mm socket and impact gun, or impact driver, the cams can be locked by using a 26mm spanner (iirc)
David
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM