Induction kit - no MAF
Scooby Regular
Joined: Oct 2000
Posts: 376
Likes: 0
From: West Malling, Kent
You can get it cheeper ...
I opted for a PiperX filter as it has a metal neck, you could go for others by cutting a piece of pvc pipe to clamp jubilee clip onto.
Then get a length of silicone hose and cut the ends at an angle, fit and clamp.
Heres one I prepared earlier ....
[This message has been edited by Nigel Bowles (edited 15 July 2001).]
[This message has been edited by Nigel Bowles (edited 15 July 2001).]
I opted for a PiperX filter as it has a metal neck, you could go for others by cutting a piece of pvc pipe to clamp jubilee clip onto.
Then get a length of silicone hose and cut the ends at an angle, fit and clamp.
Heres one I prepared earlier ....
[This message has been edited by Nigel Bowles (edited 15 July 2001).]
[This message has been edited by Nigel Bowles (edited 15 July 2001).]
Thread Starter
Scooby Regular
Joined: Dec 2000
Posts: 2,912
Likes: 0
DTS>> So it actually costs money to make my nice one slower, and on top of that fugly-fy it? 
Cheers Nigel, I assume that the neck on the PX is roughly the same diameter as the inlet on that awful plastic thingy?
/J
Cheers Nigel, I assume that the neck on the PX is roughly the same diameter as the inlet on that awful plastic thingy?
/J
Scooby Regular
Joined: Mar 1999
Posts: 25,080
Likes: 0
From: The Great White North
Showing off your upgrade digital camera again nigel!! 
On a more serious note, Nigel, could you run this setup without the Link ECU that you've got? or is this needed to get rid of the MAF?
On a more serious note, Nigel, could you run this setup without the Link ECU that you've got? or is this needed to get rid of the MAF?
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM