Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

Chirping turbos

Thread Tools
 
Search this Thread
 
Old Jan 26, 2000 | 05:55 PM
  #1  
WALKER's Avatar
WALKER
Thread Starter
Scooby Regular
 
Joined: Feb 2000
Posts: 728
Likes: 0
Cool

What must i do to get my turbo to chirp like Mr.Burns(not dumpvalve noise). I think it is something to do with the wastegate fluttering.My car is a late 99 model. Also my brother inlaw has got his cossie to do it by fitting an induction kit, which i have also done along with a PPP and a Blitz backbox. This is probably sad, but i just gotta get that noise!
Paul
Reply
Old Jan 26, 2000 | 06:13 PM
  #2  
MorayMackenzie's Avatar
MorayMackenzie
Scooby Senior
 
Joined: Jun 1999
Posts: 3,410
Likes: 0
Post

The noise is the turbo anti-lag system.

Well, you could ring Prodrive in Banbury and simply ask them if they could supply you an anti-lag system for your MY99 car. If it was an import, they wouldn't be interested, but as you have an expensive, lesser speced car I'm sure they will be very helpful!

Moray


( it is anti-lag, but you wouldn't want it on a road car.)
Reply
Old Jan 26, 2000 | 06:20 PM
  #3  
mike_nunan's Avatar
mike_nunan
Scooby Regular
 
Joined: Mar 1999
Posts: 301
Likes: 0
Post

All was explained at the end of last year. Have a look at this thread:
Reply
Old Jan 26, 2000 | 06:37 PM
  #4  
Ian Cook's Avatar
Ian Cook
Scooby Regular
 
Joined: Nov 1998
Posts: 5,485
Likes: 0
From: Northampton
Post

Teehee this old chestnut again It is most defintiely not anti lag, sorry Moray, anti lag makes popping and banging noises as its fuel exploding in the turbo to keep it spinning, which is why you dont fit it to a road car, not if you want to keep it ont he road for more than 5 minutes without a rebuild anyway. Check the thread Mike mentioned it went on for ages, and i still dont think we got to the bottom of it
Reply
Old Jan 26, 2000 | 11:20 PM
  #5  
Mike Tuckwood's Avatar
Mike Tuckwood
Scooby Regular
 
Joined: Jan 1999
Posts: 2,694
Likes: 0
Lightbulb

This one also popped up again just before Christmas o a different list, these are the 2 replies that seemed to make the most sense.


1) To the best of my knowledge, WRC cars do not use blow-off valves, because
of the anti-lag systems. The two would constantly be fighting each other.
The "WRC chirp" you refer to is compressor surge, because there is no
blow-off valve.

2) The blow off valve inhibits sharp response when changing gear, hence the
lack of use in the WRC cars, the chirp is the pressure fighting its way back
through the turbo. As WRC Turbos don't have to last that long this does not
matter but ... it puts a lot of shock into the impeller.



The trade-off of course is that the turbo stalls as some of the pressurised
air in the system rushes back through. However the WRC Turbos have specially
designed blades which allow the air to flow back without causing too much
stall (is it this flow-back which causes the chirpy noise rather then the
wastegate?)

Make your own mind up as to the accuracy of the above.

Mike.

Reply
Old Jan 27, 2000 | 12:46 AM
  #6  
WALKER's Avatar
WALKER
Thread Starter
Scooby Regular
 
Joined: Feb 2000
Posts: 728
Likes: 0
Wink

Cheers Lads

Im still confused though, why would a chipped cossie do it and not my Scoob?
Ive always been led to beleive that it is the wastegate chattering, but the blowing back of pressure through the turbine blades does make sense.
Could it be that a Cossie uses a larger turbo hence amplifying the sound?
Bewildered
Paul
Reply
Old Jan 27, 2000 | 01:51 PM
  #7  
Bob Rawle's Avatar
Bob Rawle
Sponsor
 
Joined: Mar 1999
Posts: 3,938
Likes: 1
From: Swindon
Post

The Cossie boys tend to not fit dump valves (bov)so the noise you hear is definatly the boost pressure pulsing back through the turbo.
if you have a car with a cone induction kit then try blocking off the bov return to the air intake and listen (similar noise).
I ran my car for a month like that and the part throttle pick up improved no end. I chickened out and unblocked it eventually but have modified the bov to use a stronger spring so I vent high boost only and still get the good pick up without stressing the turbo bearings.

Bob
Reply
Old Jan 27, 2000 | 04:10 PM
  #8  
WALKER's Avatar
WALKER
Thread Starter
Scooby Regular
 
Joined: Feb 2000
Posts: 728
Likes: 0
Post

Cheers Bob
I do have a cone induction kit fitted(HKS), but could you please let me no how to alter the bov If it seems fairley easy ill have a go this weekend . Thanks in advance

Paul
Reply
Old Jan 27, 2000 | 04:32 PM
  #9  
Bob Rawle's Avatar
Bob Rawle
Sponsor
 
Joined: Mar 1999
Posts: 3,938
Likes: 1
From: Swindon
Post

I have replied to Paul off list on this one.
Its not a recommended mod for Impreza's although Cossies survive ok. (or seem to)

Bob
Reply
Old Jan 27, 2000 | 04:47 PM
  #10  
WALKER's Avatar
WALKER
Thread Starter
Scooby Regular
 
Joined: Feb 2000
Posts: 728
Likes: 0
Thumbs up

Cheers Bob
Will give it a blast at the weekend
Thanks for your help

Paul
Reply
Old Jan 28, 2000 | 01:05 PM
  #11  
MorayMackenzie's Avatar
MorayMackenzie
Scooby Senior
 
Joined: Jun 1999
Posts: 3,410
Likes: 0
Post

Ian,

Cars with anti-lag systems don't run blow-of-valves (they are incompatible with the system), so the chirp IS caused (as a side effect) by the anti-lag system (sorry Ian ), along with the pops and bangs you mentioned.

Prodrive would probably not supply an import car with blanking plugs, but I bet the UK owners would be queueing up to spend at least £200 on a "Richard Burns WRC Chirp Enhancement Package"! (Just joking guys! )

Moray
(Filthy japanese import scumbag owner )
Reply
Old Jan 28, 2000 | 02:06 PM
  #12  
Ian Cook's Avatar
Ian Cook
Scooby Regular
 
Joined: Nov 1998
Posts: 5,485
Likes: 0
From: Northampton
Post

I have mailed Prodrive to ask em what it is, if they reply, that should halt the argument

BTW I wouldnt be interested in the upgrade Moray, bit too max power for me

Allegedly if you fit a sequential blow off valve you can make it sound the same, even if its not the same cause.

[This message has been edited by Ian Cook (edited 28-01-2000).]
Reply
Old Jan 28, 2000 | 05:50 PM
  #13  
MorayMackenzie's Avatar
MorayMackenzie
Scooby Senior
 
Joined: Jun 1999
Posts: 3,410
Likes: 0
Post

Ahh, that'll be the HKS Super Sequential Blow Off Valve I presume, Mr Cook...

Last car had one: Too high pitched without the noise adapter vane. Makes the car sound camp. Funny, all the girls liked it, all the blokes thought it was a bit camp! Oh well, I don't have any interest in impressing blokes!

Not quite the same as anti-lag though. My friends Supra TT sounds quite nice with the Blitz blow off.

I suppose the pops and farts associated with the measured air charge being dumped direct to atmosphere causing fueling problems may sound a little anti-laggy to some...

Moray
Reply
Old Jan 29, 2000 | 03:01 AM
  #14  
Wreckleford's Avatar
Wreckleford
Scooby Regular
 
Joined: Nov 1999
Posts: 87
Likes: 0
Post

Okay, this is a Subaru bbs, but ...
the Evo IV to VI road cars have some sort of antilag system fitted as well as using a blow-off valve. Anyone know how it works?
Reply
Old Jan 29, 2000 | 11:08 AM
  #15  
WALKER's Avatar
WALKER
Thread Starter
Scooby Regular
 
Joined: Feb 2000
Posts: 728
Likes: 0
Post

Thanks for all the replys guys. Still confused though. Great if you get a reply from Prodrive though Ian, that would put it all to rest.
As for bov,s my mates cossie was also running a dumpvalve, so you had the noise of that expelling air on gearchange but also theother noise as well.I tend to agree with Bob that it is air being pulled back through the blades:confused
Reply
Old Jan 29, 2000 | 03:24 PM
  #16  
Ian Cook's Avatar
Ian Cook
Scooby Regular
 
Joined: Nov 1998
Posts: 5,485
Likes: 0
From: Northampton
Post

No idea Moray, I heard someone saying you could get the chittering noise by fitting a sequential dump valve, but i assume you are correct. I have never really been interested in making my car sound like that, the exhaust is enough for me
Reply
Old Jan 29, 2000 | 04:00 PM
  #17  
Wreckleford's Avatar
Wreckleford
Scooby Regular
 
Joined: Nov 1999
Posts: 87
Likes: 0
Post

You can get the noise with some of the aftermarket BOVs with adjustable or just stiff springs. What happens is that at low boost (low revs, part throttle)the pressure differential is not enough to force against the spring to open the valve so you get compressor surge (the air flowing back through the compressor). At higher boost, the differential is enough to open the valve and ytou don't get the sound. I woudn't reccomend this though. You might well destroy your turbo and all just to get a sound.The HKS SSBOV does not make thsi sound as it opens t very low as well as high pressures.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
Nov 4, 2021 07:12 PM
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM
thunder8
General Technical
0
Oct 1, 2015 09:13 PM
jaygsi
Subaru Parts
0
Oct 1, 2015 12:59 AM
madmover
Member's Gallery
4
Sep 28, 2015 10:46 AM




All times are GMT +1. The time now is 09:11 AM.