DEGLAZE OR REBORE
Thread Starter
Scooby Regular
Joined: Apr 2003
Posts: 154
Likes: 0
As above. My93 wrx engine is currently in bits and was looking for advice. Pistons,piston rings and cylinder bores are worn and the engine has done high miles. So do I increase my overdraft a little or a lot
how much would i be looking at for new pistons and would there be any other modifications needed. KARL
how much would i be looking at for new pistons and would there be any other modifications needed. KARL
Scooby Regular
Joined: May 2002
Posts: 6,316
Likes: 2
From: home
If you're getting brand new pistons then rebore +0.25mm
But I would get the bores checked out properly, as you may be able to get away with a hone and a std set of pistons.
If you're short of money, you should consider a used shortblock or complete engine. Or if you want uprated parts such as forged pistons and rods, that's a new ballgame.
Do you have a budget for the cost and idea of what you want to do (if anyhting) power wise?
Paul
But I would get the bores checked out properly, as you may be able to get away with a hone and a std set of pistons.
If you're short of money, you should consider a used shortblock or complete engine. Or if you want uprated parts such as forged pistons and rods, that's a new ballgame.
Do you have a budget for the cost and idea of what you want to do (if anyhting) power wise?
Paul
Thread
Thread Starter
Forum
Replies
Last Post
