Urgent quick dump valve fitting hose question?

Reply Subscribe

Thread Tools

Search this Thread

Mar 13, 2003 | 03:53 PM

scooby_si

Thread Starter

Scooby Regular

Joined: Nov 2001

Posts: 8,238

Likes: 0

From: the middle bit

Just got a blitz DV & fitted it at Dinner & bloke who sent it included a small hose which i used as per

Now this means i have still have the original small hose going from the OE recirc DV dangling arounf the engine bay! So i need to know ASAP does this need bunging up removing etc?
Please let me know caps?
Si

Mar 13, 2003 | 03:55 PM

scooby_si

Thread Starter

Scooby Regular

Joined: Nov 2001

Posts: 8,238

Likes: 0

From: the middle bit

Which u can clearly c wobbling around under the red wires on the left

So is this ok to leave unplugged but connected to original???????
HELP
techincalretard_si

Mar 13, 2003 | 04:10 PM

David_Wallis

Scooby Regular

Joined: Nov 2001

Posts: 15,239

Likes: 1

From: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?

just take it out along with the old dumpvalve

David

Mar 13, 2003 | 04:16 PM

RaZe-=Buzz=-

Scooby Regular

Joined: Apr 2002

Posts: 1,122

Likes: 0

Cheers David - it was my d/v but my car is different to Si's so I couldn't help

Mar 13, 2003 | 04:20 PM

scooby_si

Thread Starter

Scooby Regular

Joined: Nov 2001

Posts: 8,238

Likes: 0

From: the middle bit

Cunning as a fox

I take it there's no damage in it being there in the mean time, ie while i drive it home?

When it's removed does that then mean the bung can be put where the OE valve was rather than the very end of what was stuck onto intercooler as can currently be seen right next to the VTA dump valve?
Thank you kindly