Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

'orrible noise!

Thread Tools
 
Search this Thread
 
Old Feb 6, 2003 | 10:19 PM
  #1  
blackwood's Avatar
blackwood
Thread Starter
Scooby Newbie
 
Joined: Feb 2003
Posts: 11
Likes: 0
Question

Hi Everyone,
New to the forum and need some advice please!As the car is slowing down on the overrun I'm getting a graunching *** scraping noise coming from what sounds like the drivers rear wheel,braking doesn't make any difference,but dipping the clutch quietens it down a little,so,is it the diff,a driveshaft,wheelbearing or just the newness wearing off? we've done 130000 by the way,but everything still all feels nice and tight and this noise is spoiling a fantastic car,it does sound like pads to metal,but obviously i've checked they're ok.thanks in advance.....
Regards Blackwood
Reply
Old Feb 7, 2003 | 08:33 PM
  #2  
blackwood's Avatar
blackwood
Thread Starter
Scooby Newbie
 
Joined: Feb 2003
Posts: 11
Likes: 0
Cool

Hello again,
Thanks for looking at my Question,but please,someone out there must have some idea of what this fault is!Just a pointer to a common problem would be helpful,ie.are the diffs really indestructable,or is the shaft likely to let go first?How strong are the hubs/bearings?Any help from all you Scooby experts would really be appreciated,even if it's to tell me bad news!!

Regards Blackwood
Reply
Old Feb 7, 2003 | 11:04 PM
  #3  
Jolly Green Monster's Avatar
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Post

Worth checking the wheel bearings and all bushes..

Not something I have read about on here before..

Sorry I cannot be of more help

JGM
Reply
Old Feb 7, 2003 | 11:31 PM
  #4  
blackwood's Avatar
blackwood
Thread Starter
Scooby Newbie
 
Joined: Feb 2003
Posts: 11
Likes: 0
Cool

JGM,
Thanks for taking the time to offer your help/advice,much appreciated,will act on it for starters and let you all know if I find anything....

Regards Blackwood
Reply
Old Feb 8, 2003 | 09:53 PM
  #5  
Jolly Green Monster's Avatar
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Wink

No problem.. you can check the wheel bearings but jacking the car up and checking for play in the wheels movement by pulling bottom of the wheel forward and pushing the top of the wheel inwards etc..

A little bit is fine but anything more and you need new bearings.

I have 118,000miles on mine so glad to see others with more on about.

JGM
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Phil3822
ScoobyNet General
33
Oct 2, 2015 03:22 AM
Jamesh10
General Technical
3
Oct 1, 2015 11:56 PM
legb4rsk
Non Scooby Related
14
Oct 1, 2015 05:18 AM
sivo
ScoobyNet General
12
Sep 26, 2015 12:34 PM
Baskey
General Technical
3
Sep 25, 2015 03:45 PM




All times are GMT +1. The time now is 09:17 AM.