i know,i know,,,,,
its been done before ,but am unsure what to do.

i have a wagon my99(t)
have just changed my scoobysport backbox(as the baffles were gone and the tailpipe was rusty) to a magnex 3.5 round tailpipe version,with a de-cat centre section that it silenced.

i am considering changing the downpipe to a magnex also,but am worried about the noise factor.

will it be much louder?
and will i start having overboost problems?
also would i gain anything from having a non-silenced centre section?

thanks for your advice in advance,,
cheers

roy

[Edited by buzzerboyroy - 12/8/2002 9:21:27 PM]

[Edited by buzzerboyroy - 12/8/2002 9:25:36 PM]

 

failing the magnex downpipe,,,what should be best to fit??
i like the scoobysport downpipe but the centre section of my magnex is 3" bore ,will the two marry up ok or would i have to get the 3"downpipe to 2.5" to match up with the magnex centre?????
very confusing this!!!!!!!!!!!!!!!!!

 

btt

 

I thought magnex were 2.5 bore not 3. Anyhow Hayward and Scott (Scoobysport of old) can do the same downpipe but instead of flaring the last 4 inches down to 2.5 bore, they leave it at 3".

Just look in scoobyshop, they are in there.