Knocklink sensor wiring (Urgent)
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Apr 2002
Posts: 1,135
Likes: 0
From: www.ladsoc.co.uk
Just in the middle of fitting my own knocklink sensor, come to make the two wires off that plug onto the sensor but according to the instructions one of the terminals is an earth which can be measured to the body of the sensor, i have tried this and got nothing. Which wire goes to which terminal? Tried brdevelopments but no answer.
Cheers
Cheers
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Apr 2002
Posts: 1,135
Likes: 0
From: www.ladsoc.co.uk
My sensors blown up!!!!!
Just kiddin, noticed that the plug which plugs onto the sensor has #1 and #2 on it, i was looking on the sensor for em. I decided using secretagents info to put the brown wire to #1.
Tried tapping the sensor before fitting it to the car and nothing happened, found the body of the sensor has to be earthed. Tried tapping again and SUCCESS!
Maybe it doesnt matter which way the wires go but didnt bother swapping them to find out.
Going to decide where to fit the box tommorrow, tempted to make a smaller box with the links LEDs in.
Cheers all. XXX
Just kiddin, noticed that the plug which plugs onto the sensor has #1 and #2 on it, i was looking on the sensor for em. I decided using secretagents info to put the brown wire to #1.
Tried tapping the sensor before fitting it to the car and nothing happened, found the body of the sensor has to be earthed. Tried tapping again and SUCCESS!
Maybe it doesnt matter which way the wires go but didnt bother swapping them to find out.
Going to decide where to fit the box tommorrow, tempted to make a smaller box with the links LEDs in.
Cheers all. XXX
Trending Topics
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Apr 2002
Posts: 1,135
Likes: 0
From: www.ladsoc.co.uk
Its something i might do if i find it difficult to see it where it is, just below stereo, above ash tray. So far it seems ok. However i will be sure to let you know if i find a suitable box.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM








