Please help I am putting in my Dawes afm tomorrow and haven’t got a clue as to how to connect it. I have had it sat in the garage for a month now so its about time I had ago. I did a search and read all the posts about it but its all double Dutch to me. so could someone please explain in simple terms what to do, and where to connect the wires. Is the ECU best? Where is this and what do I connect to etc?

thanks

Paul

I changed my down pipe and clutch myself so not totally useless but I have no idea when it comes to wires!!!!


[Edited by ktm1974 - 9/20/2002 11:22:50 PM]

 

What model and MY is your car..??

Dan

 

sorry forgot to put that 94 wrx

 

There are 2 ways of fitting it...

The first but not the prefered is to take the earth and the power direct from the battery, this is how i had my dawes set up, then take the signal from the o2 sensor but near the left hand side of the header tank, the wires from the o2 sensor meet at a plug around this area, i just taped into the 'WHITE' wire...

If you want to do it the other way by taking the wire at the ECU you want the white wire with silver strips....

When you get to the ECU you want B43 PIN 6 see pic bellow:



Dont get cought out like me, the first pin on B43 does not have a wire in it, its blank...

You can also take the power and earth at the ECU too..


Hope this helps mate

Dan

 

thanks dan that makes it a bit clearer!!! if i take the live and earth from the ecu as well do u know what block/pin is correct

thanks

paul

ps will let u know if it works out or not hopefully the car will still work after i have fitted it!!

 

You can take the live from B95, pin12 and the earth from B43 pin 10....

Dan