Hi Guys, So I reached out to the local Subaru dealership and they, in turn, reached out to Subaru Japan to purchase a Wiring Harness for my Subaru Impreza WRX. Unfortunately, this part has been discontinued and Subaru says they can't supply it. Could anybody help me find one? Local car breakers don't have it either. It's a Bulkhead Harness, I have attached a diagram of what I'm looking for and my vehicle details below:
Make: Subaru
Model: Impreza WRX
Year: 2007
VIN #: GDA-021127

 

Matty Baker (MB Developments on here) is bound to have one, he's a subaru breaker.

 

How do I find this Matty Baker page? I've given it a few tries and I just can't find it. Please help!!

 

Matty posts on here and on Facebook.

There's a thread here that he commented on recently, fire him a PM and he may be bale to help you out.

https://www.scoobynet.com/scoobynet-...elopments.html

 

Basically you are looking for the complete main wiring harness for a 2007 JDM (Revision G) WRX with Sport shift.

Part number 81401FE585 (Harness - Bulkhead)

Very doubtful to find a completely compatible one in the UK.

 

Well where and how can I try and get one???

 

What did your auto electrician do??

https://www.scoobynet.com/lighting-a...o-hawkeye.html

Probably try a breaker in Japan.

 

He tried and tried and gave up. Figured I'll just replace everything. I've emailed 1 breaker I know in Japan, I think I know another but I don't know so many.

 

Even if you find one, replacing the main loom would be a mammoth task as it spans the bulkhead into the engine bay





There is also the instument loom


and the AT transmission loom


I'd be looking for a new auto electrician although without the proper JDM wiring diagrams it's probably not easy.

 

I tried 3 auto-electricians all of whom gave up. I figured if this is what it takes then I'll just have to get it done.

 

Www.scoobyclinic.com I believe do custom wiring looms, could contact them to see if they can make and install a new one

 

Thanks a lot!!

 

Bit of a stretch from Chesterfield to Johannesburg SA especially as he doesn't know what the problem actually is................

 

Is the existing loom completely beyond repair?

 

Have you read the other thread? https://www.scoobynet.com/lighting-a...o-hawkeye.html

Loom replacement to me seems overkill, but each to there own.