RALLYTECH stainless steel engine dress up bolt kit GROUP BUY JANUARY
#182
Scooby Senior
I have received the bolt kit with blue washers. Awesome communication and tremendous goods. Top job Tim, hope your enjoying the project thread too.
The only instructions for this kit are for a GC8, although Tim came through with great communication and a couple of pics later and awesome products I decided to change the standard nuts and bolts for shiny stuff.
Here goes
Decided to do this on the drive in freezing cold and rain showers, good news was it wasn't snowing.
First is first before PICS (I know the engine bay is filthy but its my daily driver and still has the original Subaru protection on it)
These products from Tim are Allen head bolts so the best advice is make sure your Allen keys fit perfect. and only remove one bolt at a time and replace and always make sure the bolt is the correct length and has the correct thread. No worries with these bolts from Tim they fit perfect and If your doing a GC8 you will get to use all of them. The spare bolts I have from Tim I will use on the Rally car so wont go to waste.
The next pics are of the completed job Hope you enjoy.
These are great products.
Tim on a side note is it possible to get the 12mm bolts a bit longer so we can change the intercooler bracket bolts and have you any bolts to replace the bolts attaching the dumpvalve.
Also does anyone know if removing the bolts holding the aircon pipes onto the pump will allow the aircon gas to escape.
The only instructions for this kit are for a GC8, although Tim came through with great communication and a couple of pics later and awesome products I decided to change the standard nuts and bolts for shiny stuff.
Here goes
Decided to do this on the drive in freezing cold and rain showers, good news was it wasn't snowing.
First is first before PICS (I know the engine bay is filthy but its my daily driver and still has the original Subaru protection on it)
These products from Tim are Allen head bolts so the best advice is make sure your Allen keys fit perfect. and only remove one bolt at a time and replace and always make sure the bolt is the correct length and has the correct thread. No worries with these bolts from Tim they fit perfect and If your doing a GC8 you will get to use all of them. The spare bolts I have from Tim I will use on the Rally car so wont go to waste.
The next pics are of the completed job Hope you enjoy.
These are great products.
Tim on a side note is it possible to get the 12mm bolts a bit longer so we can change the intercooler bracket bolts and have you any bolts to replace the bolts attaching the dumpvalve.
Also does anyone know if removing the bolts holding the aircon pipes onto the pump will allow the aircon gas to escape.
Last edited by SUBTYPER; 12 February 2014 at 12:03 AM.
#185
Hi mate yes we have, please email rallytechsubaru@gmail.com
Yes we can get you some more mate, please email rallytechsubaru@gmail.com
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
HEL Performance
Car Parts For Sale
28
13 October 2015 07:36 PM