Notices
Computer & Technology Related Post here for help and discussion of computing and related technology. Internet, TVs, phones, consoles, computers, tablets and any other gadgets.

Raspberry Pi media center and NAS.

Thread Tools
 
Search this Thread
 
Old 09 July 2013, 02:35 PM
  #31  
EddScott
Scooby Regular
 
EddScott's Avatar
 
Join Date: Sep 2003
Location: West Wales
Posts: 12,573
Received 64 Likes on 32 Posts
Default

Originally Posted by john banks
I have just strung Cat 6 in three directions from where the BT master socket is. Wireless routers are on the end, and a daisy chain through one of them gets from new garage to wife's workshop. Don't think I could have pulled through wires for everything to one panel.
Running the cables through the house was quite a task. I wanted as much of it chased into the walls as possible and I did them myself which was nerve wracking at first making the holes but once I replastered one the rest were fine. We managed to run most of the wires into the loft and feed into the rooms below. The loft is converted which made it tricky. Also managed to get the sky dude to use the same channels which was good as they don't normally agree and it's all surface mounted which looks naff.

Impossible on your own though. One of you to push the rod through, the other to try and grab it on other end. I think it's worth it though.
Old 11 July 2013, 12:42 PM
  #32  
EddScott
Scooby Regular
 
EddScott's Avatar
 
Join Date: Sep 2003
Location: West Wales
Posts: 12,573
Received 64 Likes on 32 Posts
Default

For those that might be interested. My home cab.



Just buying bits and bobs to finish the server.
Old 11 July 2013, 12:53 PM
  #33  
JackClark
Scooby Senior
 
JackClark's Avatar
 
Join Date: Dec 2000
Location: Overdosed on LCD
Posts: 20,852
Received 51 Likes on 34 Posts
Default

I haven't used a cable in my house since 1998. What on earth are you doing?
Old 11 July 2013, 01:28 PM
  #34  
Ant
Scooby Regular
 
Ant's Avatar
 
Join Date: Jun 2008
Location: Notts
Posts: 9,243
Likes: 0
Received 0 Likes on 0 Posts
Default

I feel inadequate with a 8 port gigabit switch in the loft
Old 11 July 2013, 01:52 PM
  #35  
tony de wonderful
Scooby Regular
Thread Starter
 
tony de wonderful's Avatar
 
Join Date: Mar 2010
Posts: 10,329
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by JackClark
I haven't used a cable in my house since 1998. What on earth are you doing?
If I was networking my own house I'd use powerline adapters for fixed installation stuff like TV's, playstations, etc.
Old 11 July 2013, 02:34 PM
  #36  
Ant
Scooby Regular
 
Ant's Avatar
 
Join Date: Jun 2008
Location: Notts
Posts: 9,243
Likes: 0
Received 0 Likes on 0 Posts
Default

Thing is with powerline adapters they're not that brilliant for speed
Old 11 July 2013, 02:37 PM
  #37  
EddScott
Scooby Regular
 
EddScott's Avatar
 
Join Date: Sep 2003
Location: West Wales
Posts: 12,573
Received 64 Likes on 32 Posts
Default

In order of speed and reliability :-

Wireless > powerline > wired
Old 11 July 2013, 04:35 PM
  #38  
SinghSuperStud
Scooby Regular
iTrader: (2)
 
SinghSuperStud's Avatar
 
Join Date: Jul 2001
Location: Walsall
Posts: 1,918
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by EddScott
In order of speed and reliability :-

Wireless > powerline > wired
Wired > wireless > powerline

Wired (gigabit) ..... but even on a 100 connection its better to have reliable speed than fluctuations you sometimes get on wireless
Old 11 July 2013, 05:45 PM
  #39  
Galifrey
Scooby Regular
iTrader: (3)
 
Galifrey's Avatar
 
Join Date: Mar 2006
Location: Corsham
Posts: 1,356
Likes: 0
Received 0 Likes on 0 Posts
Default

Wired>Powerline>Wireless you mean?

Gigabit>500mbps>300mps!
Old 11 July 2013, 05:47 PM
  #40  
Galifrey
Scooby Regular
iTrader: (3)
 
Galifrey's Avatar
 
Join Date: Mar 2006
Location: Corsham
Posts: 1,356
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Ant
Thing is with powerline adapters they're not that brilliant for speed
Sorry, but 500mbps on powerline is brilliant imho

https://www.google.co.uk/search?q=50...w=1881&bih=867
Old 11 July 2013, 07:14 PM
  #41  
Ant
Scooby Regular
 
Ant's Avatar
 
Join Date: Jun 2008
Location: Notts
Posts: 9,243
Likes: 0
Received 0 Likes on 0 Posts
Default

but thats down to your how far the powerline adapters i had , at best connected at 86mbps sometimes a 100mbps. i got fed up of it cutting out so i just wired some cat6 and got gigabit instead
Old 11 July 2013, 08:01 PM
  #42  
john banks
Scooby Regular
 
john banks's Avatar
 
Join Date: Nov 2000
Location: 32 cylinders and many cats
Posts: 18,658
Likes: 0
Received 1 Like on 1 Post
Default

I don't like powerline adapters either having tried two different types that only ran at a fraction of their claimed speed and were unreliable. Even 500mbps claimed stuff was slow. In a small house or on the same ring they run OK, but wifi usually works in that situation.

EddScott that looks great. Wife and I have got quite good at getting cables where they really shouldn't be able to go in C shaped building with lots of tiny attics (we fish them down from attics between the stone outer wall and the timber kit inside) but yours is another league.
Old 11 July 2013, 10:33 PM
  #43  
tony de wonderful
Scooby Regular
Thread Starter
 
tony de wonderful's Avatar
 
Join Date: Mar 2010
Posts: 10,329
Likes: 0
Received 0 Likes on 0 Posts
Default

A mate of mine has set up a powerline ethernet network in his house. He says he doesn't like the idea of loads of wifi radio signals zipping about all the time. He has small kids.
Old 11 July 2013, 11:39 PM
  #44  
EddScott
Scooby Regular
 
EddScott's Avatar
 
Join Date: Sep 2003
Location: West Wales
Posts: 12,573
Received 64 Likes on 32 Posts
Default

Guy at work won't leave the router on when not needed in case it fries his family's brains. I suggested tin foil hats
Old 12 July 2013, 12:04 AM
  #45  
tony de wonderful
Scooby Regular
Thread Starter
 
tony de wonderful's Avatar
 
Join Date: Mar 2010
Posts: 10,329
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by EddScott
Guy at work won't leave the router on when not needed in case it fries his family's brains. I suggested tin foil hats
It might not be so stupid. I read about a statistical correlation between people living near high voltage power lines and getting various illness. But I don't think the foil will help.
Old 12 July 2013, 06:20 AM
  #46  
Galifrey
Scooby Regular
iTrader: (3)
 
Galifrey's Avatar
 
Join Date: Mar 2006
Location: Corsham
Posts: 1,356
Likes: 0
Received 0 Likes on 0 Posts
Default

I have been using powerline adaptors since the old 80mbps ones and have never had any throughput issues, although the older ones sometimes disconnected. The only time I have seen issues with the throughput was when I was sharing the bandwidth with another user on the powerline network which is the same with wired.

Wireless always has issues with range, dropped connections requiring a reboot (likely windows or hardware related).
Old 12 July 2013, 06:21 AM
  #47  
Galifrey
Scooby Regular
iTrader: (3)
 
Galifrey's Avatar
 
Join Date: Mar 2006
Location: Corsham
Posts: 1,356
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Ant
but thats down to your how far the powerline adapters i had , at best connected at 86mbps sometimes a 100mbps. i got fed up of it cutting out so i just wired some cat6 and got gigabit instead
By far the most preferable route, if I didn't rent I would hardwire as well
Old 15 July 2013, 10:47 PM
  #48  
jaytc2003
Scooby Regular
iTrader: (1)
 
jaytc2003's Avatar
 
Join Date: Aug 2005
Location: Manchester ish
Posts: 18,547
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Ant
i'm tempted too , i want to know how it handles 1080p also bluray iso files
I recently got one and thought I would chuck a lord of the rings full hd through it, handles it fine, it does skip frames if you go back out to the menus though whilst the film is playing (which you have no reason to do)
Old 15 July 2013, 10:52 PM
  #49  
jaytc2003
Scooby Regular
iTrader: (1)
 
jaytc2003's Avatar
 
Join Date: Aug 2005
Location: Manchester ish
Posts: 18,547
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Galifrey


Didn't spend anything like a grand on mine, NAS is connected directly to my router which can also take a USB drive and use it as a NAS, XBMC on the HTPC runs a dual core 2.2ghz Intel cpu on an Asus P5 motherboard with Onboard Graphics, Blu-ray drive and uses old components from a PC I upgraded for the rest in a Silverstone Case with media remote. Using 200mbps homeplugs to connect around the house.
similar specs to mine and the same case except I have a 6 series radeon in there. Had 2 x dual tuners DVB-S and DVB-T so could record 3 things whilst watching a fourth. Upstairs now as I have gone back sky
Old 16 July 2013, 06:29 AM
  #50  
Galifrey
Scooby Regular
iTrader: (3)
 
Galifrey's Avatar
 
Join Date: Mar 2006
Location: Corsham
Posts: 1,356
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by jaytc2003
similar specs to mine and the same case except I have a 6 series radeon in there. Had 2 x dual tuners DVB-S and DVB-T so could record 3 things whilst watching a fourth. Upstairs now as I have gone back sky
I did have an Nvidia 8800 GTX but it died so went back to the onboard graphics which work pretty well tbh.

Also now got SKY+ as well as the HUMAX
Old 16 July 2013, 11:50 PM
  #51  
Ant
Scooby Regular
 
Ant's Avatar
 
Join Date: Jun 2008
Location: Notts
Posts: 9,243
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by jaytc2003
I recently got one and thought I would chuck a lord of the rings full hd through it, handles it fine, it does skip frames if you go back out to the menus though whilst the film is playing (which you have no reason to do)
Nice one! I may pick one up
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Frizzle-Dee
Essex Subaru Owners Club
13
09 March 2019 07:35 PM
Frizzle-Dee
Essex Subaru Owners Club
13
01 December 2015 09:37 AM
psport
Subaru Parts
3
04 October 2015 07:35 PM
Ganz1983
Subaru
5
02 October 2015 09:22 AM
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM



Quick Reply: Raspberry Pi media center and NAS.



All times are GMT +1. The time now is 09:25 PM.