frayz

iTrader: (7)

Hope you can make it Gary. As said, we will have a 2 post lift on the day if you need to fit anything else.

Moley

iTrader: (9)

I'm sure i'll be there.... Stu owes me a cup of tea

Might just have to do a few tweeks to it on that ramp

frayz

iTrader: (7)

Good stuff mate

Look forward to seeing ya

funkmasterjay

I need to 2remove my steering wheel and turn it one spline. Also hopedully they can do something with my exhaust hanger. Lol

Scoobysmeet

I'm a definet and require the full works lol

frayz

iTrader: (7)

Lol, I'm sure you do Paul. Haha
Just want people to confirm interest as Skidmarques are putting on food etc.

RB5_390

If I was to get hold of the springs that are to be fitted would they or someone there be able to do this then I can have 2 new tyres fitted and get the prodrive setup all in one day!

Would this be possible?

Scoobysmeet - fancy meeting up for the drive down there?

trails

iTrader: (41)

Broken front spring just replaced so need mine done beofre I sell it, see you all there on Sunday

1. Frayz CONFIRMED
2. Knotty
3.
4. 53
5. Essexdon
6. Moley_WRX*
7. OurWRX
8. SirFozz (TBC)
9. DantheMan2605 CONFIRMED
10. simon57. (not a scoob if im allowed please)
11. trails (another bit of French) CONFIRMED
12. Jamie330S
13. modelmotorvation (tbc)
14. Scoobysmeet
15. stu ( in the Evo )
16. Steve Cranfield
17. Jerry555
18. Inviroman
19. FunkMasterJay
20. SJ - Toyota Celica

DantheMan2605

No worries, need to measure the depth of my splitter to see if it'll work. Don't wanna lift the front up and fit it then find out I still can't get up the drive.

Irc the front has been lowered about 24mm and just catches the kerb at the moment.

frayz

iTrader: (7)

Feel free to contact them and ask. But doing a spring change is a big ask in one day considering everyone's cars will also need to be done and I'm unsure of how many staff they will have on on the day.

Please call them and discuss.


Fray

Steve Cranfield

iTrader: (2)

I am confirmed.

If i manage to get hold of a new uprated rear anti roll bar and droplinks, will i be able to fit them? Also, more to the point, will someone be able to help me fit them

Inviroman

iTrader: (2)

May only be a spectator as time is limited for me this Sunday, would like to have the Prodrive setup done if possible and would i need any other items to allow this to be completed.
Is there a meet place? or direct to the venue?

Cheers,

Ed.

1. Frayz CONFIRMED
2. Knotty
3.
4. 53
5. Essexdon
6. Moley_WRX*
7. OurWRX
8. SirFozz (TBC)
9. DantheMan2605 CONFIRMED
10. simon57. (not a scoob if im allowed please)
11. trails (another bit of French) CONFIRMED
12. Jamie330S
13. modelmotorvation (tbc)
14. Scoobysmeet
15. stu ( in the Evo )
16. Steve Cranfield
17. Jerry555
18. Inviroman CONFIRMED

19. FunkMasterJay
20. SJ - Toyota Celica

frayz

iTrader: (7)

Steve, yes should get the ARB on.
Ed, prodrive settings again shouldn't be an issue.

Inviroman

iTrader: (2)

Cheers,
May sound stupid, but is there a data/spec sheet to show the differences between standard STi and the prodrive set up in regards to Toe/Camber/Caster etc.
Thanks,
Ed.

frayz

iTrader: (7)

They have the specs on computer. You will get an alignment sheet from before and after the alterations.

RB5_390

Gave them a call and decided that i will leave it for now and just have a chat with him Sunday so he knows exactly what i'm looking for etc..

vwmike

Frays iam there Saturday having my sprint Impreza fitted with 4 new tyres and full geo set up don't wont to go to aggressive as I will be driving it to events what settings would you recommend, I have camber adjustable top mounts on bc coilovers and have rear camber bolts.

Thanks mike

Inviroman

iTrader: (2)

Thanks but was looking to understand the changes in the toe/camber/caster from standard to PD and what the implications of runing the PD set up, waying up the pros and cons, if there is any.

DantheMan2605

Not long before your looking for 600 bhp with the way your going

Scoobysmeet

I'll give you hand mate. Arbs and drop links are no sweat mate.

Yeah I'm up for a little convoy mate. When and where do you want to meet?

Inviroman

iTrader: (2)

Watch this space! Will leave the engine for a while, driving set up next on my list.
One day all the little bits will come together as one!

funkmasterjay

I can't wait for this.

J

RB5_390

BP Garage at Boreham? Not sure what time though as the open time hasnt been confirmed.. or has it?

frayz

iTrader: (7)

Day starts at 10am guys

frayz

iTrader: (7)

All cars are different, as are how you want them to drive. Chat with Damien on Sunday.

frayz

iTrader: (7)

From memory the PD settings are 1.2 deg neg camber up front, 0.8 deg zero toe up front, 1mm toe in on the rear.

There are no cons with those setting Ed as they're not aggressive at all.

53

iTrader: (41)

I'm still coming

frayz

iTrader: (7)

Great guys, I wanna get as many people to this as possible.
Good geometry affects the way your car drives and handles at ALL speeds. Possibly one of the single most value for money mods you can do next to good tyres.

Moley

iTrader: (9)

Ahh **** it... if the silver one isn't ready i'll bring the Type R or Seat and get that done


1. Frayz CONFIRMED
2. Knotty
3.
4. 53
5. Essexdon
6. Moley_WRX CONFIRMED
7. OurWRX
8. SirFozz (TBC)
9. DantheMan2605 CONFIRMED
10. simon57. (not a scoob if im allowed please)
11. trails (another bit of French) CONFIRMED
12. Jamie330S
13. modelmotorvation (tbc)
14. Scoobysmeet
15. stu ( in the Evo )
16. Steve Cranfield
17. Jerry555
18. Inviroman CONFIRMED

19. FunkMasterJay
20. SJ - Toyota Celica

frayz

iTrader: (7)

Great stuff Gary. Too good an opportunity to miss.