The Toucan has landed. Many thanks to Tim at JT Innovations.



and a fuel pressure sensor.

 

Nice read, looking forward to see it finished

 

Nice mate toying with a gt35r build at min, what exhaust size did you get? What's best for track use?

 

3 inch front to back mate, its around 92 db

 

Sory I mean exhaust turbo housing .82 or that?

 

.82 mate

 

Mmm nice what I was going for plenty of grunt for track

 

Check you out...busting out the billet thang! pfft...who needs a 35r...

 

Looking good Steve ;-) it'll be wild when it's sorted, my wagons going down just about the route

 

Darren was telling me

 

Boot Sorted now.



Would have liked it to be an exact match but you can't buy them.

 

Washer bottle removed, relocated washer to use intercooler spray in boot. The only thing I had to buy was a one way valve from an aquarium shop to stop the water returning to the bottle. This will make way for the litchfield swirl pot setup. Ran the wire in whilst I replaced the interior.

 

Final parts ordered today.

RCM twisted turbo water supply kit
RCM twisted turbo oil drain kit
RCM VVT Oil supply hose kit
RCM head tank relocation bracket
RCM black turbo header tank hose
RCM 15 degree 100mm silicone hose
100mm spun aluminium induction trumpet
Stainless hose clamp
Large K&N cone filter 260mm tall
RCM black turbo outlet 2.5"

Massive thanks to Mike at RCM for sorting this order out, as had to go back and forth a few times, also a massive thanks to Olly for taking time to discuss a sump setup with me. Top stuff again guys.

 

Looks great Steve, many similarities with my own car, although I have only 2.1 and gt30

 

Top motor m8 how much have you spent

 

too much

 

What's next on your list?

 

This is going to be lovely Steve. Be prepared for your 360 to feel very very slow lol.
But I'd rather the fezza than my car. Lovely pair of rides.

Looking forward to watching this one come together.

 

360 went ages ago frayz. Think this one will be a more usable car, just trying to keep it oem looking. RCM stuff turned up yesterday so now have everything in place.

 

Useable? Hmmm lol

Depends how many shares you own in your local fuel station

 

They all say that...about the oem looking bit that is! You going to do any track or drag days?

 

"useable",,,,,,in this weather?

 

some track.

 

 

Tip top work mate, you must be wanting it to be finished as soon as possible. Out of curiosity what power are you hoping it will make

 

Nice car Steve and a good write up

I also have a 2.35 underway at the moment, still torn over turbo choice at the moment so am watching with interest to see how the GT35 pans out

Good luck!

 

Exceptional project thread - subscribed.

 

Martyn reckons 600 ish on v power

 

thanks

 

Many Thanks