Notices

Classic digital climate control

Thread Tools
 
Search this Thread
 
Old Feb 10, 2019 | 08:55 AM
  #31  
Dasco's Avatar
Dasco
Scooby Regular
iTrader: (3)
 
Joined: Sep 2004
Posts: 90
Likes: 0
From: Essex
Default

Originally Posted by paulhills
(i know its an old thread,. and its probably not known, but i'll ask anyway,)
does anyone know how to convert a uk2000 slider type controls to the climate control above?

i want to convert the slider controls and will get the parts from someone breaking an STI with climate control,. but i am not sure what bits i will need to buy,. is it just the heater matrix, control unit and a wiring pigtail? or does it require full wiring loom,. maybe other parts i have not thought of?

i am stripping my car back to a bare shell and relocating the fuse box (going for a clean engine bay look) so i don't mind if its alot of work,. but i just need to know what parts i will need to buy from an STI before i start the rebuilding of the wiring loom / interior etc.

thanks
If you have a lever unit you will need everything from the sti. The levers manually pull open and close the flaps to move the air from feet to vents to windscreen. You will need the actuators, motors, wiring and possibly the ducting, until you get yours and the sti apart and look you won't know. Good luck.
Reply
Old Jul 10, 2021 | 12:51 PM
  #32  
drafter88's Avatar
drafter88
Scooby Newbie
 
Joined: Jul 2021
Posts: 4
Likes: 0
From: Kandy
Default

Originally Posted by Dasco
The above wiring is incorrect as you can only get hot air when set to 32 degrees and the flap controls to direct heat don't work.
If you use the following as you increase temperature with it set to auto the flaps will move to direct air to the right areas ie floor hands or screen and increase the speed of fans if needed. I did post this on the Aussie site and several others, if you do it and get stuck send me a PM.


1 of 16 VIOLET or PURPLE
2 of 16 NOT USED
3 of 16 BROWN/YELLOW
4 of 16 BLUE
5 of 16 BLUE/WHITE
6 of 16 NOT USED
7 of 16 YELLOW
8 of 16 NOT USED
9 of 16 NOT USED
10 of 16 NOT USED
11 of 16 NOT USED
12 of 16 RED/YELLOW
13 of 16 GREEN/YELLOW from 7 of 20
14 of 16 NOT USED
15 of 16 NOT USED
16 of 16 YELLOW/BLACK

1 of 20 WHITE/RED
2 of 20 RED
3 of 20 GREEN/RED not moved
4 of 20 BLUE/RED
5 of 20 GREEN/ORANGE
6 of 20 GREEN/WHITE
7 of 20 GREEN/YELLOW from 5 of 16
8 of 20 YELLOW/RED
9 of 20 WHITE
10 of 20 GREEN/RED from 13 of 16
11 of 20 BLACK
12 of 20 ORANGE
13 of 20 WHITE/GREEN
14 of 20 NOT USED
15 of 20 NOT USED
16 of 20 RED/BLUE
17 of 20 PINK/BLACK
18 of 20 BLACK/BLUE
19 of 20 NOT USED
20 of 20 LIGHT GREEN/RED
Hi Tried this config seems, I'm having heater issues, hot air won't come even after 32' it's still the cold air , Thank you
Reply
Old Jul 10, 2021 | 12:55 PM
  #33  
Dasco's Avatar
Dasco
Scooby Regular
iTrader: (3)
 
Joined: Sep 2004
Posts: 90
Likes: 0
From: Essex
Default

Originally Posted by drafter88
Hi Tried this config seems, I'm having heater issues, hot air won't come even after 32' it's still the cold air , Thank you
You must have some wires the wrong way round or in wrong place as this config is still in my car and working fine.

Last edited by Dasco; Jul 10, 2021 at 12:58 PM.
Reply
Old Jul 14, 2021 | 05:07 PM
  #34  
drafter88's Avatar
drafter88
Scooby Newbie
 
Joined: Jul 2021
Posts: 4
Likes: 0
From: Kandy
Default

hello, Greetings from Sri Lanka!

it works great, apologize for the earlier reply, yes some of the wires were mismatched

Thanks a lot works like a charm.
Reply
Old Jul 14, 2021 | 05:08 PM
  #35  
drafter88's Avatar
drafter88
Scooby Newbie
 
Joined: Jul 2021
Posts: 4
Likes: 0
From: Kandy
Default

Originally Posted by Dasco
You must have some wires the wrong way round or in wrong place as this config is still in my car and working fine.
hello, Greetings from Sri Lanka!

it works great, apologies for the earlier reply, yes some of the wires were mismatched

Thanks a lot works like a charm
Reply
Old Jul 14, 2021 | 05:54 PM
  #36  
Dasco's Avatar
Dasco
Scooby Regular
iTrader: (3)
 
Joined: Sep 2004
Posts: 90
Likes: 0
From: Essex
Default

Originally Posted by drafter88
hello, Greetings from Sri Lanka!

it works great, apologies for the earlier reply, yes some of the wires were mismatched

Thanks a lot works like a charm
Well done for finding the mismatched wires. It took me three days to work out the wiring so it worked as it should as the original post didn't work correctly only hot air when set to 32.
Reply
Old Jul 15, 2021 | 12:42 PM
  #37  
drafter88's Avatar
drafter88
Scooby Newbie
 
Joined: Jul 2021
Posts: 4
Likes: 0
From: Kandy
Default

Originally Posted by Dasco
Well done for finding the mismatched wires. It took me three days to work out the wiring so it worked as it should as the original post didn't work correctly only hot air when set to 32.
mind me if I asking, what it should be when you set it to 32 , cheers

by the way, this how mine looks now, so happy , thanks to you guys and the person who directed me here


few pics of my ride, she;s a jdm version 4 sti ra, ( yes previous owners deleted bit of RA stuff)



Last edited by drafter88; Jul 15, 2021 at 12:46 PM.
Reply
Old May 3, 2022 | 01:47 PM
  #38  
Puppy's Avatar
Puppy
Scooby Newbie
 
Joined: Jan 2016
Posts: 1
Likes: 0
From: Worcester
Default Is there anyone in the West Midlands who can wire mine up properly please? I'm having

Originally Posted by Dasco
The above wiring is incorrect as you can only get hot air when set to 32 degrees and the flap controls to direct heat don't work.
If you use the following as you increase temperature with it set to auto the flaps will move to direct air to the right areas ie floor hands or screen and increase the speed of fans if needed. I did post this on the Aussie site and several others, if you do it and get stuck send me a PM.


1 of 16 VIOLET or PURPLE
2 of 16 NOT USED
3 of 16 BROWN/YELLOW
4 of 16 BLUE
5 of 16 BLUE/WHITE
6 of 16 NOT USED
7 of 16 YELLOW
8 of 16 NOT USED
9 of 16 NOT USED
10 of 16 NOT USED
11 of 16 NOT USED
12 of 16 RED/YELLOW
13 of 16 GREEN/YELLOW from 7 of 20
14 of 16 NOT USED
15 of 16 NOT USED
16 of 16 YELLOW/BLACK

1 of 20 WHITE/RED
2 of 20 RED
3 of 20 GREEN/RED not moved
4 of 20 BLUE/RED
5 of 20 GREEN/ORANGE
6 of 20 GREEN/WHITE
7 of 20 GREEN/YELLOW from 5 of 16
8 of 20 YELLOW/RED
9 of 20 WHITE
10 of 20 GREEN/RED from 13 of 16
11 of 20 BLACK
12 of 20 ORANGE
13 of 20 WHITE/GREEN
14 of 20 NOT USED
15 of 20 NOT USED
16 of 20 RED/BLUE
17 of 20 PINK/BLACK
18 of 20 BLACK/BLUE
19 of 20 NOT USED
20 of 20 LIGHT GREEN/RED
Is there anyone in the West Midlands who can re wire mine up properly please, im having no end of trouble with mine
Reply
Old Sep 24, 2024 | 03:56 AM
  #39  
一炉41's Avatar
一炉41
Scooby Newbie
 
Joined: Sep 2024
Posts: 1
Likes: 0
From: New Zealand
Default

Originally Posted by Dasco
The above wiring is incorrect as you can only get hot air when set to 32 degrees and the flap controls to direct heat don't work.
If you use the following as you increase temperature with it set to auto the flaps will move to direct air to the right areas ie floor hands or screen and increase the speed of fans if needed. I did post this on the Aussie site and several others, if you do it and get stuck send me a PM.


1 of 16 VIOLET or PURPLE
2 of 16 NOT USED
3 of 16 BROWN/YELLOW
4 of 16 BLUE
5 of 16 BLUE/WHITE
6 of 16 NOT USED
7 of 16 YELLOW
8 of 16 NOT USED
9 of 16 NOT USED
10 of 16 NOT USED
11 of 16 NOT USED
12 of 16 RED/YELLOW
13 of 16 GREEN/YELLOW from 7 of 20
14 of 16 NOT USED
15 of 16 NOT USED
16 of 16 YELLOW/BLACK

1 of 20 WHITE/RED
2 of 20 RED
3 of 20 GREEN/RED not moved
4 of 20 BLUE/RED
5 of 20 GREEN/ORANGE
6 of 20 GREEN/WHITE
7 of 20 GREEN/YELLOW from 5 of 16
8 of 20 YELLOW/RED
9 of 20 WHITE
10 of 20 GREEN/RED from 13 of 16
11 of 20 BLACK
12 of 20 ORANGE
13 of 20 WHITE/GREEN
14 of 20 NOT USED
15 of 20 NOT USED
16 of 20 RED/BLUE
17 of 20 PINK/BLACK
18 of 20 BLACK/BLUE
19 of 20 NOT USED
20 of 20 LIGHT GREEN/RED

Thank you very very much! I just followed your instructions on my JDM v5 sti, it not working perfectly, like the face/feet position only blowing air for face after few seconds.
Thanks to @rexmang for the correct wiring and some testing. Please check his reply in this thread for the wiring which works for my JDM v5.
DO NOT yank off the pin out of the connector!!! Use a pick to lift up the plastic tab from the pin hole and gently pull the wire out.
Also, I have some questions about the Forester HVAC unit:
1, WIll it remember the temp/fan speed when I last shut it off? it always sets to 25 degrees when I turn it on.
2, Can I set it auto with leaving AC off?

Big difference by looking

Easier to mark 5/16, 13/16, 7/20 and remove all pins

Achive!

Last edited by 一炉41; Sep 28, 2024 at 10:51 AM.
Reply
Old Sep 26, 2024 | 08:08 AM
  #40  
rexmang's Avatar
rexmang
Scooby Newbie
 
Joined: Jun 2018
Posts: 3
Likes: 0
From: Melbourne
Default

..



Last edited by rexmang; Dec 11, 2024 at 01:28 AM.
Reply
Old Sep 28, 2024 | 04:50 AM
  #41  
rexmang's Avatar
rexmang
Scooby Newbie
 
Joined: Jun 2018
Posts: 3
Likes: 0
From: Melbourne
Default

Recently been through this with some mates. Wiring is different across models and versions. Dascos wiring suits V4 STI.

Wiring for AUSTRALIAN DELIVERED V5 STI COUPE

1 of 16 PURPLE
2 of 16 NOT USED
3 of 16 BROWN/YELLOW
4 of 16 BLUE/WHITE
5 of 16 BLUE
6 of 16 NOT USED
7 of 16 YELLOW
8 of 16 NOT USED
9 of 16 NOT USED
10 of 16 NOT USED
11 of 16 NOT USED
12 of 16 RED/YELLOW
13 of 16 GREEN/YELLOW [From 7 of 20 of original wiring]
14 of 16 NOT USED
15 of 16 NOT USED
16 of 16 YELLOW/BLACK

1 of 20 WHITE/GREEN [From 5/20 original wiring]
2 of 20 RED
3 of 20 GREEN/RED not moved
4 of 20 BLUE/RED
5 of 20 GREEN/ORANGE
6 of 20 GREEN/WHITE
7 of 20 GREEN/YELLOW [From 5/16 original wiring]
8 of 20 YELLOW/RED
9 of 20 WHITE
10 of 20 GREEN/RED [From 13 of 16 of original wiring]
11 of 20 BLACK
12 of 20 ORANGE
13 of 20 WHITE/GREEN [From 4/20 original wiring]
14 of 20 NOT USED
15 of 20 NOT USED
16 of 20 RED/BLUE
17 of 20 PINK/BLACK
18 of 20 BLACK/BLUE
19 of 20 NOT USED
20 of 20 LIGHT GREEN/RED

Wiring for JDM V5/V6 STI.

1 of 16 PURPLE
2 of 16 NOT USED
3 of 16 BROWN/YELLOW
4 of 16 BLUE/WHITE
5 of 16 BLUE
6 of 16 NOT USED
7 of 16 YELLOW
8 of 16 NOT USED
9 of 16 NOT USED
10 of 16 NOT USED
11 of 16 NOT USED
12 of 16 RED/YELLOW
13 of 16 GREEN/YELLOW [From 7 of 20 of original wiring]
14 of 16 NOT USED
15 of 16 NOT USED
16 of 16 YELLOW/BLACK

1 of 20 WHITE/RED
2 of 20 RED
3 of 20 GREEN/RED not moved
4 of 20 BLUE/RED
5 of 20 GREEN/ORANGE
6 of 20 GREEN/WHITE
7 of 20 GREEN/YELLOW [From 5/16 original wiring]
8 of 20 YELLOW/RED
9 of 20 WHITE
10 of 20 GREEN/RED [From 13 of 16 of original wiring]
11 of 20 BLACK
12 of 20 ORANGE
13 of 20 WHITE/GREEN
14 of 20 NOT USED
15 of 20 NOT USED
16 of 20 RED/BLUE
17 of 20 PINK/BLACK
18 of 20 BLACK/BLUE
19 of 20 NOT USED
20 of 20 LIGHT GREEN/RED

Last edited by rexmang; Oct 3, 2024 at 03:40 AM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
robangel
ScoobyNet General
4
Oct 28, 2016 05:49 PM
yorkyturbo
Interior
1
Apr 24, 2010 05:11 PM
yorkyturbo
Lighting and Other Electrical
2
Nov 29, 2008 10:57 AM
BLACK V5
ICE
3
Nov 21, 2004 03:15 PM




All times are GMT +1. The time now is 03:21 PM.